PROMATCH® Aqua Waterborne Spray Stain Base

824-2912 Promatch® Aqua Waterborne Spray Stain Base

Product Codes:

824-2912

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to staining.

General Information:

Maximum tint load, 10% maximum

PDF Name: US-PIS_824-2912_Promatch_Aqua_Waterborne_Spray_Stain_Base

Tack Free Time: N/A

Files: US-PIS_824-2912_Promatch_Aqua_Waterborne_Spray_Stain_Base.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

Promatch Waterborne Spray Stain Base is a stain base that can be tinted to any color using 896, 888, 877 colorants, and Promatch Aqua Dye.

spec_uses:

Used as a clear base to develop spray stain colors.

VOC less exempt lb/gal: <1.8

VOC lb/gal: <0.2

VOC less exempt g/l: <220

VOC g/l: <25

VOC lb/lb Solid: <0.25

VHAPs lb/lb Solid: <0.02

Note:

N/A

Suggested Uses:

As a clear base to develop spray stain colors

Mixing Ratio:

N/A

Pot Life: N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: Water

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

Zahn#2 15 -18 seconds

Flash Point: >200 ºF

Density (lb/gal): 8.41

Solid (% by weight): 7.88%

Solid (% by volume): 6.58%

Shelf Life (months): 6

PROMATCH® Aqua Waterborne Spray Stain Base

824-2912 Promatch® Aqua Waterborne Spray Stain Base

Find distributor

spec_description:

Promatch Waterborne Spray Stain Base is a stain base that can be tinted to any color using 896, 888, 877 colorants, and Promatch Aqua Dye.

Back

PROMATCH® Aqua Waterborne Spray Stain Base

824-2912 Promatch® Aqua Waterborne Spray Stain Base

spec_description:

Promatch Waterborne Spray Stain Base is a stain base that can be tinted to any color using 896, 888, 877 colorants, and Promatch Aqua Dye.

Product code
Product Codes:

824-2912

Product information

Product specifications

Viscosity:

Zahn#2 15 -18 seconds

Flash Point: >200 ºF

Density (lb/gal): 8.41

Solid (% by weight): 7.88%

Solid (% by volume): 6.58%

Shelf Life (months): 6

Uses

Environmental data (as supplied)

Application data

Surface Preparation

General Information

Drying Times

Find distributor

Download product information sheets

Files: US-PIS_824-2912_Promatch_Aqua_Waterborne_Spray_Stain_Base.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap