AQUA WET GLAZE Base

824-4700 Promatch® Aqua Wet Glaze Base WB Stain

Product Codes:

824-4700

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to staining.

General Information:

N/A

PDF Name: US-PIS_824-4700_Promatch_Aqua_Wet_Glaze_Base_WB_Stain

Tack Free Time: N/A

Files: US-PIS_824-4700_Promatch_Aqua_Wet_Glaze_Base_WB_Stain.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

PromatchAqua Wet Glaze Base is the newest waterborne glaze base offering superior wipe-ability due to his excellent open time. The PromatchAqua Wet Glaze Base can be sprayed, brushed or wiped to create the desired effect. PromatchAqua Wet Glaze Base can be tinted to any color using 896, 888, or 877 tints.

spec_uses:

Promatch Aqua Wet Glaze Base provides excellent adhesion over all Chemcraft systems. Promatch Aqua Wet Glaze Base can be used for furniture, cabinet, general millwork and others.

VOC less exempt: <7.3

VOC lb/gal: <3.38

VOC less exempt g/l: <875

VOC g/l: <406

VOC lb/lb Solid: <6.40

VHAPs lb/lb Solid: <4.8

Note:

N/A

Suggested Uses:

As a base to develop glaze color

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: Water

Retarder: N/A

Clean-up Solvent: Water

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

Zahn #2 signature cup 20-24 sec at 77°F

Flash Point: >144° F

Density (lb/gal): 8.39

Solid (% by weight): 6.3%

Solid (% by volume): 5.3%

Shelf Life (months): 12

AQUA WET GLAZE Base

824-4700 Promatch® Aqua Wet Glaze Base WB Stain

Find distributor Trouver un distributeur

spec_description:

BACK

AQUA WET GLAZE Base

824-4700 Promatch® Aqua Wet Glaze Base WB Stain

spec_description:

Product codeCodes de produit
Product Codes:

824-4700

Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 20-24 sec at 77°F

Flash Point: >144° F

Density (lb/gal): 8.39

Solid (% by weight): 6.3%

Solid (% by volume): 5.3%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_824-4700_Promatch_Aqua_Wet_Glaze_Base_WB_Stain.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap