DYE Stain

890-85XX Promatch® Dyes SB Stain

Product Codes:

890-8500 Clear Base
890-8502 Yellow
890-8505 Brown
890-8506 Red
890-8508 Orange
890-8509 Blue
890-8510 Black
890-8511 Walnut
890-8512 Mahogany
890-8513 Oak
890-8514 Cherry
890-8515 Maple
890-8516 Pine

Surface Preparation:

Wood substrate should be sanded with 120, 150 or 180 grit paper prior to staining or coating. Wood must be well sanded and without large imperfections.

General Information:

Most of these products can be applied by spraying as received but can also be reduced any amount with 890-8500 clear base.

Toner penetrates deeply and cannot be worked in, like wiping stains, in order to achieve uniformity. Birch is especially suitable for Toner.

IMPORTANT: Product must be thoroughly agitated before use.

PDF Name: US-PIS_890-85XX_Promatch_Dyes_SB_Stain

Tack Free Time: N/A

Files: US-PIS_890-85XX_Promatch_Dyes_SB_Stain.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

The Promatch Dye line consists of dyes dissolved in a non-grain raising solvent blend. These products have brighter colors and better clarity than wiping and spray stains.

spec_uses:

Dyes are used as a first coat on wood to give bright, clear, transparent effects. It is adequate for interior exposure on expensive furniture, but is not designed for exterior exposure.

VOC less exempt: < 7.5

VOC lb/gal: <1.7

VOC less exempt g/l: < 900

VOC g/l: < 205

VOC lb/lb Solid: < 26

VHAPs lb/lb Solid: <0.1

Note:

N/A

Suggested Uses:

Wood Stain

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: 890-8500

Retarder: N/A

Clean-up Solvent: 800-5500

Recommended Wet Film: N/A

Coverage:

Wood substrate should be sanded with 120, 150 or 180 grit paper prior to staining or coating. Wood must be well sanded and without large imperfections.

Note application:

N/A

Viscosity:

N/A

Flash Point: -4°F (-20°C)

Density (lb/gal): ~6.8

Solid (% by weight): 0 – 2.0%

Solid (% by volume): 0 – 1.0%

Shelf Life (months): 24

DYE Stain

890-85XX Promatch® Dyes SB Stain

Find distributor Trouver un distributeur

spec_description:

The Promatch Dye line consists of dyes dissolved in a non-grain raising solvent blend. These products have brighter colors and better clarity than wiping and spray stains.

BACK

DYE Stain

890-85XX Promatch® Dyes SB Stain

spec_description:

The Promatch Dye line consists of dyes dissolved in a non-grain raising solvent blend. These products have brighter colors and better clarity than wiping and spray stains.

Product codeCodes de produit
Product Codes:

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: -4°F (-20°C)

Density (lb/gal): ~6.8

Solid (% by weight): 0 – 2.0%

Solid (% by volume): 0 – 1.0%

Shelf Life (months): 24

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_890-85XX_Promatch_Dyes_SB_Stain.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap