CHEMBASE Pigmented Primer
545-1901 Chembase 275 Black NC Pigmented Primer
Product Codes:

545-1901

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit stearated paper prior to coating. Chembase 275 Black should be sanded prior to being topcoated with 280/320 grit stearated paper. Appropriate topcoats are Chemlack 275 Black 230-22XX, Chemlack Express 275 441-22XX or Chemlack 275 441-51XX. Chembase 275 Black cannot be used on metal or old oil finishes

General Information:

Agitate material before use.  Chembase 275 Black must be agitated thoroughly at all times to ensure product consistency and consistent gloss. 

Apply at 3-5 mils wet on sanded substrate.  A further coat may be applied after complete drying followed by sanding with 280/320 grit stearated paper. 

Maximum film build of Chembase 275 Black should not exceed 3 mils dry.  Maximum film build of total coating system must not exceed 4 mils dry.

Chembase 275 Black should not be used and dried at temperatures below 64°F or relative humidity above 65%. 

PDF Name: US-PIS_545-1901_Chembase_275_Black_NC_Pigmented_Primer
Tack Free Time: 15 minutes
Files: US-PIS_545-1901_Chembase_275_Black_NC_Pigmented_Primer.pdf
Dry to Sand : 30 - 45 minutes
Dry to Stack: 2 - 3 hours
Tack Free Time: Flash off before entering oven
Dry to Sand: 20 – 30 minutes
Dry to Stack: 60 – 90 minutes
Note: N/A
spec_description:

Chembase 275 Black is a single component nitrocellulose basecoat/primer that provides good build and hide.  This product has been formulated to meet 275 g/l VOC regulations. Chembase 275 Black is a recommended primer for Chemcraft Chemlack 275 Black nitrocellulose lacquer. Chembase 275 Black is a quality coating designed for the professional applicator who requires an easy to handle product. Chembase 275 Black is supplied at a ready to spray viscosity.  This coating will dry quickly and sand easily.

Recommended:  Architectural Woodwork Institute Nitrocellulose Lacquer System (8th Ed).

spec_uses:

This system is designed for millwork, household furniture, decorative items as well as many other interior wood applications.

VOC less exempt: <2.30
VOC lb/gal: <0.62
VOC less exempt g/l: <275
VOC g/l: <75
VOC lb/lb Solid: <0.25
VHAPs lb/lb Solid: <0.00
Note:

N/A

Suggested Uses:

Wood Primer

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

Zahn #2 signature cup 22 seconds

Reducer: 800-5500
Retarder: 800-5915
Clean-up Solvent: 800-5500
Recommended Wet Film: 3 – 5 mils
Coverage:

Coverage (reduced 10% for application) is 267 sq. ft/gal at 1 mil dry and at 100% transfer efficiency.  Coverage will vary depending on method of application or coating thickness.

Note application:

N/A

Viscosity:

Zahn #2 signature cup 28-34 sec at 77°F

Flash Point: -4°F (-20°C)
Density (lb/gal): 8.11
Solid (% by weight): 30.1%
Solid (% by volume): 18.4%
Shelf Life (months): 12

CHEMBASE Pigmented Primer

545-1901 Chembase 275 Black NC Pigmented Primer

Find distributor Trouver un distributeur

spec_description:

Chembase 275 Black is a single component nitrocellulose basecoat/primer that provides good build and hide.  This product has been formulated to meet 275 g/l VOC regulations. Chembase 275 Black is a recommended primer for Chemcraft Chemlack 275 Black nitrocellulose lacquer. Chembase 275 Black is a quality coating designed for the professional applicator who requires an easy to handle product. Chembase 275 Black is supplied at a ready to spray viscosity.  This coating will dry quickly and sand easily.

Recommended:  Architectural Woodwork Institute Nitrocellulose Lacquer System (8th Ed).

Read more

CHEMBASE Pigmented Primer

545-1901 Chembase 275 Black NC Pigmented Primer

spec_description:

Chembase 275 Black is a single component nitrocellulose basecoat/primer that provides good build and hide.  This product has been formulated to meet 275 g/l VOC regulations. Chembase 275 Black is a recommended primer for Chemcraft Chemlack 275 Black nitrocellulose lacquer. Chembase 275 Black is a quality coating designed for the professional applicator who requires an easy to handle product. Chembase 275 Black is supplied at a ready to spray viscosity.  This coating will dry quickly and sand easily.

Recommended:  Architectural Woodwork Institute Nitrocellulose Lacquer System (8th Ed).

Read more
Product codeCodes de produit
Product Codes:

545-1901


Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 28-34 sec at 77°F

Flash Point: -4°F (-20°C)
Density (lb/gal): 8.11
Solid (% by weight): 30.1%
Solid (% by volume): 18.4%
Shelf Life (months): 12

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us