131-53XX Variset® Select Pre-Cat Clear Tint Base Topcoat

This product is recommended for kitchen cabinets or residential furniture as well as other interior wood applications.

Substrate must be sanded using 120, 150 grit stearated paper prior to staining or coating. Primers or sealers, if used, should be sanded with 240, 280 and 320 grit stearated paper prior to being coated.  The substrate as well as the primers or sealers should be topcoated within eight hours of being sanded.  VARISET SELECT Clear Tint Base Topcoat cannot be used on metal, old oil or cellulose lacquers.

VARISET SELECT Clear TINT Base Topcoat is applied in one to two coats on all kinds of wood meant for indoor use.  Thorough sanding between the coats is a must for good adhesion.  The second and subsequent coats must be applied the same day as the previous coat is sanded.
Contact with metal surfaces should be avoided. To ensure proper sheen, the material should be agitated at all times.
VARISET SELECT Clear Tint Base Topcoat demonstrates good resistance to moisture, household and office liquids.  When this product is used as its own sealer, its special formulation ensures excellent filling and easy sanding properties with superior holdout for subsequent coatings.  VARISET SELECT Clear Tint Base Topcoat must be thoroughly stirred, while adding reducer in the recommended ratio.  Total recommended film build of the VARISET SELECT system should not exceed 4 mils dry.
VARISET SELECT Clear Tint Base Topcoat must not be polluted with oil and must not be sanded with steel wool between coats.
VARISET SELECT Clear Tint Base Topcoat must not be used and dried at temperatures below 64°F or relative humidity above 65%.  During the curing process, the coatings must not be exposed to ammonia vapors.  Ammonia cleaners should not be used for cleaning the finished surface.  This may accelerate discoloration.