VARISEAL Sealer

431-4601 Variseal® Pre-Cat Clear Sealer

Product Codes:

431-4601

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit stearated paper prior to staining or coating. Stain systems used under acid catalyzed systems should be acid stable. AkzoNobel recommends using 825-90XX, 825-91XX Promatch® C-Mix Stains or 890-85XX Promatch Dye Stains.

General Information:

Agitate material before use. Always mix Variseal while adding hardener and reducers in the recommended mixing ratios. Variseal must be agitated thoroughly at all times to ensure product consistency.

Apply one or two coats at 3 – 5 mill wet. The second coat must be applied the same day as the previous coat is sanded.

Variseal may be catalyzed to further enhance its durability. Contact your coating supplier for a recommendation.

Variseal must not be polluted with oil, varnish or the like and must not be sanded with steel wool between coats and before topcoating. Variseal must not be used and dried at temperatures below 64°F or relative humidity above 65%. During hardening the coating must not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finished surface. This may accelerate discoloration.

The maximum film build of Variseal should not exceed 2 mils dry. Maximum film build of total coating system must not exceed 4 mils dry.

This product does contain formaldehyde, but the quantity is below the reportable amount according to OSHA regulation 1910.1048.

PDF Name: US-PIS_431-4601_Variseal_Pre-Cat_Clear_Sealer

Tack Free Time: 10 – 15 minutes

Files: US-PIS_431-4601_Variseal_Pre-Cat_Clear_Sealer.pdf

Dry to Sand : 20 – 30 minutes

Dry to Stack: 2 Hours

Tack Free Time: Flash off before entering oven

Dry to Sand: 15 – 20 minutes

Dry to Stack: 60 – 90 minutes

Note: N/A

spec_description:

Variseal is a one-component pre-catalyzed Reactive Amino Coating (RAC) designed to be used with the Varicure system. It dries fast and sands easily to provide a smooth finish. Variseal is provided at a ready to use viscosity for ease of application.

Special Recognition: Meets Kitchen Cabinet Manufacturer Association (KCMA) Standards.

Recommended: Architectural Woodwork Institute (AWI). T.R.2.

spec_uses:

Variseal is the recommended sealer for the Varicure® system and is intended for use on office and household furniture, kitchen cabinets, as well as many other interior wood applications.

VOC less exempt: <5.9

VOC lb/gal: <5.0

VOC less exempt g/l: <708

VOC g/l: <600

VOC lb/lb Solid: <3.2

VHAPs lb/lb Solid: <0.45

Note:

N/A

Suggested Uses:

Wood Finish

Mixing Ratio:

98 parts 431-4601, 2 parts 873-0870 (Pot Life 8 hours)

99.5 parts 431-4601, 0.5 parts 873-1205 (Pot Life 8 hours)

99 parts 431-4601, 1 parts 873-1244 (Pot Life 10 days)

Pot Life:

See mixing ratio

Application Viscosity:

Zahn #2 signature cup 19 - 22 seconds

Reducer: 803-1325

Retarder: 800-5328

Clean-up Solvent: 803-1298

Recommended Wet Film: 3 – 5 mils

Coverage:

241 sq ft/gal at 1 mil dry and at 100% transfer efficiency. Coverage will vary depending on method of application or coating thickness.

Note application:

N/A

Viscosity:

Zahn #2 signature cup 19 - 22 sec at 77°F

Flash Point: -4° F (-20°C)

Density (lb/gal): 7.8

Solid (% by weight): 21%

Solid (% by volume): 15%

Shelf Life (months): 6

VARISEAL Sealer

431-4601 Variseal® Pre-Cat Clear Sealer

Find distributor Trouver un distributeur

spec_description:

Special Recognition: Meets Kitchen Cabinet Manufacturer Association (KCMA) Standards.

Recommended: Architectural Woodwork Institute (AWI). T.R.2.

BACK

VARISEAL Sealer

431-4601 Variseal® Pre-Cat Clear Sealer

spec_description:

Special Recognition: Meets Kitchen Cabinet Manufacturer Association (KCMA) Standards.

Recommended: Architectural Woodwork Institute (AWI). T.R.2.

Product codeCodes de produit
Product Codes:

431-4601

Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 19 - 22 sec at 77°F

Flash Point: -4° F (-20°C)

Density (lb/gal): 7.8

Solid (% by weight): 21%

Solid (% by volume): 15%

Shelf Life (months): 6

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_431-4601_Variseal_Pre-Cat_Clear_Sealer.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap