Chemlife
870-1613 Chemlife® 24 Flattening Paste
Product Codes:

870-1613

Surface Preparation:

N/A

General Information:

Agitate product thoroughly before use. Add to product while under agitation and reduce gloss as required. Flattening Paste 870-1613 must be mixed thoroughly with the coating to ensure consistency of gloss. Air mixers are recommended to achieve uniform results.  Mix for 10 – 15 minutes until homogenous mixture is obtained.   

Contact your AkzoNobel representative if you are attempting to reduce the gloss more than 15 degrees.

This product should only be use with Chemlife 24 product line.

PDF Name: US-PIS_870-1613_Chemlife_24_Flattening_Paste
Tack Free Time: N/A
Files: US-PIS_870-1613_Chemlife_24_Flattening_Paste.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
Dry to Sand: N/A
Dry to Stack: N/A
Note: N/A
spec_description:

Flattening Paste 870-1613 is a powder dispersion used for gloss adjustment. This flattening paste was especially developed for the Chemlife 24 product line. 

spec_uses:

Gloss Adjustments 

VOC less exempt: <6.1
VOC lb/gal: <6.1
VOC less exempt g/l: <725
VOC g/l: <725
VOC lb/lb Solid: <2.9
VHAPs lb/lb Solid: <0.2
Note:

N/A

Suggested Uses:

Gloss Adjustment

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: 55°F (13°C)
Density (lb/gal): 8.15
Solid (% by weight): 26%
Solid (% by volume): 17%
Shelf Life (months): 12

Chemlife

870-1613 Chemlife® 24 Flattening Paste

Find distributor Trouver un distributeur

spec_description:

Flattening Paste 870-1613 is a powder dispersion used for gloss adjustment. This flattening paste was especially developed for the Chemlife 24 product line. 

Read more

Chemlife

870-1613 Chemlife® 24 Flattening Paste

spec_description:

Flattening Paste 870-1613 is a powder dispersion used for gloss adjustment. This flattening paste was especially developed for the Chemlife 24 product line. 

Read more
Product codeCodes de produit
Product Codes:

870-1613


Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: 55°F (13°C)
Density (lb/gal): 8.15
Solid (% by weight): 26%
Solid (% by volume): 17%
Shelf Life (months): 12

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us