Ora Verde

876-9033 ora Verde® High Gloss PU Hardener

Product Codes:

876-9033

Surface Preparation:

N/A

General Information:

The mixed product contains 876-9033, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.

The relative humidity in the application and drying room should not exceed 75 % for maximum coating performance.

PDF Name: US-PIS_876-9033_ora_Verde_High_Gloss_PU_Hardener

Tack Free Time: N/A

Files: US-PIS_876-9033_ora_Verde_High_Gloss_PU_Hardener.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

Polyisocyanate co-polymer solution, it is used as a low yellowing hardener for two-component high gloss polyurethanes.

spec_uses:

Hardener for Chiaro high gloss topcoat and Bianco high gloss topcoat

VOC less exempt: <5.3

VOC lb/gal: <5.3

VOC less exempt g/l: <636

VOC g/l: <636

VOC lb/lb Solid: <1.73

VHAPs lb/lb Solid: <0.01

Note:

N/A

Suggested Uses:

Hardener for Chiaro high gloss topcoat 436-4490 and Bianco high gloss topcoat 109-4490

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: N/A

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

Zahn #2 signature cup 16 sec at 77°F

Flash Point: -4 °F

Density (lb/gal): 8.37

Solid (% by weight): 36.6%

Solid (% by volume): 30.7%

Shelf Life (months): 6

Ora Verde

876-9033 ora Verde® High Gloss PU Hardener

Find distributor Trouver un distributeur

spec_description:

Polyisocyanate co-polymer solution, it is used as a low yellowing hardener for two-component high gloss polyurethanes.

BACK

Ora Verde

876-9033 ora Verde® High Gloss PU Hardener

spec_description:

Polyisocyanate co-polymer solution, it is used as a low yellowing hardener for two-component high gloss polyurethanes.

Product codeCodes de produit
Product Codes:

876-9033

Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 16 sec at 77°F

Flash Point: -4 °F

Density (lb/gal): 8.37

Solid (% by weight): 36.6%

Solid (% by volume): 30.7%

Shelf Life (months): 6

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_876-9033_ora_Verde_High_Gloss_PU_Hardener.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap