Booth Coater

990-1209 Booth Coater

Product Codes:

990-1209

Surface Preparation:

N/A

General Information:

990-1209 Booth Coater is supplied ready to spray. Ensure the booth is clean and clear of any paint residue. The surface of the booth should be cleaned to the bare metal.

Product must be thoroughly agitated before use.

Booth Coater 990-1209 sprays on and sets up to give proper hang. If using a conventional spray application, the air pressure should be increased to 50 – 60 psi. A thicker coat will facilitate peeling of the coating.

PDF Name: US-PIS_990-1209_Booth_Coater

Tack Free Time: N/A

Files: US-PIS_990-1209_Booth_Coater.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

A white vinyl strippable booth coater for general booth production.

spec_uses:

N/A

VOC less exempt: <3.30

VOC lb/gal: <1.12

VOC less exempt g/l: <400

VOC g/l: <134

VOC lb/lb Solid: <0.65

VHAPs lb/lb Solid: <0.02

Note:

N/A

Suggested Uses:

Spray booth coating

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

Zahn #2 signature cup 22 - 25 seconds

Reducer: N/A

Retarder: N/A

Clean-up Solvent: 803-1302 or 803-1298

Recommended Wet Film: N/A

Coverage:

273 sq. ft./gal at 1 mil dry and at 100% transfer efficiency. Coverage will vary depending on method of application or coating thickness.

Note application:

N/A

Viscosity:

Zahn #4 signature cup 20-22 sec at 77°F

Flash Point: 20°F (-7°C)

Density (lb/gal): 7.6

Solid (% by weight): 26%

Solid (% by volume): 17%

Shelf Life (months): 12

Booth Coater

990-1209 Booth Coater

Find distributor Trouver un distributeur

spec_description:

A white vinyl strippable booth coater for general booth production.

BACK

Booth Coater

990-1209 Booth Coater

spec_description:

A white vinyl strippable booth coater for general booth production.

Product codeCodes de produit
Product Codes:

990-1209

Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #4 signature cup 20-22 sec at 77°F

Flash Point: 20°F (-7°C)

Density (lb/gal): 7.6

Solid (% by weight): 26%

Solid (% by volume): 17%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_990-1209_Booth_Coater.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap