D-Dur Hardener

999-062 D-Dur Hardener

Product Codes:

999-062

Surface Preparation:

Refer to the appropriate polyurethane coating’s Product Information Sheet for surface preparation.

General Information:

Refer to the appropriate polyurethane coating’s Product Information Sheet for usage.

This material contains an isocyanate based reactant. Refer to the material data sheet and follow all precautions associated with handling and use of these materials.

PDF Name: US-PIS_999-062_D-Dur_Hardener

Tack Free Time: N/A

Files: US-PIS_999-062_D-Dur_Hardener.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

D-Dur Hardener is a polyisocyanate co-polymer solution.

spec_uses:

Hardener for 620-XXX D-Dur

VOC less exempt: <4.7

VOC lb/gal: <4.7

VOC less exempt g/l: <564

VOC g/l: <564

VOC lb/lb Solid: <1.3

VHAPs lb/lb Solid: <0.01

Note:

See individual compliance sheets for specific data

Suggested Uses:

Hardener for D-Dur

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: N/A

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

Zahn #2 signature cup 15-16 seconds

Flash Point: 81° F (27°C)

Density (lb/gal): 8.33

Solid (% by weight): 44.4%

Solid (% by volume): 36.9%

Shelf Life (months): 6

D-Dur Hardener

999-062 D-Dur Hardener

Find distributor Trouver un distributeur

spec_description:

D-Dur Hardener is a polyisocyanate co-polymer solution.

BACK

D-Dur Hardener

999-062 D-Dur Hardener

spec_description:

D-Dur Hardener is a polyisocyanate co-polymer solution.

Product codeCodes de produit
Product Codes:

999-062

Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 15-16 seconds

Flash Point: 81° F (27°C)

Density (lb/gal): 8.33

Solid (% by weight): 44.4%

Solid (% by volume): 36.9%

Shelf Life (months): 6

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_999-062_D-Dur_Hardener.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap