N Butyl Acetate

800-5301 N Butyl Acetate (100-122) (014-1900)

Product Codes:

800-5301 N Butyl Acetate

Surface Preparation:

N/A

General Information:

N/A

PDF Name: CA-PIS_800-5301_N_Butyl_Acetate_(100-122)_(014-1900)

Tack Free Time: N/A

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

Ester type solvent with a medium evaporation rate.

spec_uses:

It is a thinner and reducer for general use in lacquer and varnish. Especially suitable for polyurethane coatings.

VOC less exempt lb/gal: 7.33

VOC lb/gal: 7.33

VOC less exempt g/l: 880

VOC g/l: 880

VOC lb/lb Solid: 0.00

VHAPs lb/lb Solid: 0.00

Note:

See individual compliance sheets for specific data.

Suggested Uses: N/A

Mixing Ratio:

See Technical bulletin of the product to be reduced

Pot Life: N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: N/A

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: 27°C

Density (lb/gal): 0.88 ± 2% at 25°C

Solid (% by weight): 0%

Solid (% by volume): 0%

Shelf Life (months): Unlimited

N Butyl Acetate

800-5301 N Butyl Acetate (100-122) (014-1900)

Find distributor

spec_description:

Ester type solvent with a medium evaporation rate.

Back

N Butyl Acetate

800-5301 N Butyl Acetate (100-122) (014-1900)

spec_description:

Ester type solvent with a medium evaporation rate.

Product code
Product Codes:

800-5301 N Butyl Acetate

Product information

Product specifications

Viscosity:

N/A

Flash Point: 27°C

Density (lb/gal): 0.88 ± 2% at 25°C

Solid (% by weight): 0%

Solid (% by volume): 0%

Shelf Life (months): Unlimited

Uses

Environmental data (as supplied)

Application data

Surface Preparation

General Information

Drying Times

Find distributor

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

À propos de notre marque	Produits	Distributeurs	Utilisation
Nous contacter	Produits Pré-Catalysés	Nos distributeurs	Tutoriels vidéo
	Produits Post-Catalysés	Portail de commande de revêtements pour bois	Guide de résolution des problèmes
	Systèmes en polyuréthane		Glossaire
	Systèmes de couleur		Spécifications techniques
	Produits vinylique		Application mobile
	Nitrocellulose
	Spécialisés

Témoins	Paramètres des témoins	Confidentialité	Plan du site