550-1600 Aquaprime® WB Pigmented Primer

This product is designed for hardwoods or MDF. It is formulated especially for windows and door frames, joinery pieces, and cabinets. Excellent primer when used in conjunction with the Aquawhite® or for pre-primed jobs only.

Substrate must be sanded using 120, 150 or 180 grit paper prior to coating. Aquaprime Basecoat should be sanded with 280/320 grit paper prior to being coated. Aquaprime Basecoat should be coated within (8) hours of being sanded for maximum adhesion. When recoating, the previous coat of Aquaprime Basecoat must be sanded and the next coat applied within (8) hours.

Mix material before use. Add water to reduce if required and mix thoroughly. Aquaprime is used under 228-46XX and 228-95XX. Apply by spray at 4 - 5 mils wet. Aquaprime Basecoat must be agitated thoroughly at all times to ensure product consistency. Contact with metal surfaces should be avoided. Maximum film build of total coating system must not exceed 4 mils dry. Application and drying conditions must be at temperatures of 18C or higher and at a humidity of less than 65%. Increased air flow or drying temperatures, including infrared, will greatly decrease dry times. The completed coating system should be checked for required properties prior to start-up of production.