131-52XX Variset® Select White Pre-Cat Pigmented Topcoat

VARiSET SELECT White Topcoat is recommended for kitchen cabinets, office and household furniture, as well as other interior wood applications.

Wood substrate must be sanded using 120, 150 or 180 grit stearated paper prior to coating. An appropriate primer is VARISET SELECT Primer or self-seal.  When recoating, the previous coat of VARISET SELECT  White Topcoat or VARISET SELECT Primer must be sanded and the next coat applied within eight hours.  VARISET SELECT  White Topcoat cannot be used on metal, old oil or cellulose lacquers. .

Agitate material before use.  Always mix VARISET SELECT White Topcoat while adding reducers in the recommended mixing ratios.  VARISET SELECT White Topcoat must be agitated thoroughly at all times to ensure product consistency and consistent gloss.
Apply at 3 - 5 mils wet on sanded or primed substrate. Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper.  Maximum film build of VARISET SELECT White Topcoat should not exceed 4 mils dry.  Maximum film build of total coatings system must not exceed 4 mils dry.  The second and subsequent coats must be applied the same as the previous coat is sanded.
Contact with metal surfaces should be avoided.
VARISET SELECT White Topcoat must not be polluted with oil, varnish or the like and must not be sanded with steel wool between coats. VARISET SELECT White Topcoat must not be used and dried at temperatures below 64°F or relative humidity above 65%.  During hardening, the enamel must not be exposed to ammonia vapors.  Ammonia cleaners should not be used for cleaning the finished surface.  This may accelerate discoloration.