- Acquaduro
- 550-1761 Acquaduro™ 1K Waterborne Neutral Primer
- Product Codes:
550-1761
- Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to coating. Acquaduro™ 1K Waterborne Neutral Primer should be sanded with 280/320 grit paper prior to being coated. Acquaduro™ 1K Waterborne Neutral Primer should be coated within (8) hours of being sanded for maximum adhesion.
- General Information:
Mix material before use. Add water to reduce if required and mix thoroughly. Apply by spray at 4 - 6 mils wet. Acquaduro™ 1K Waterborne Neutral Primer must be agitated thoroughly at all times to ensure product consistency. Contact with metal surfaces should be avoided. Maximum film build of total coating system must not exceed 4 mils dry.
- PDF Name: US-PIS_550-1761_Acquaduro_1K_Waterborne_Neutral_Primer
- Tack Free Time: 10 minutes
- Files: US-PIS_550-1761_Acquaduro_1K_Waterborne_Neutral_Primer.pdf
- Dry to Sand : 20 minutes
- Dry to Stack: 12 hours
- Tack Free Time: 5 minutes
- VOC less exempt lb/gal: 0.36
- Dry to Sand: 10 minutes
- VOC lb/gal: 0.16
- VOC lb/lb Solid: 0.02
- Dry to Stack: 30 minutes
- VHAPs lb/lb Solid: 0.00
- Note:
N/A
- spec_description:
Acquaduro™ 1K Neutral Primer is a ready to use neutral waterborne primer. This waterborne primer provides excellent durability and water resistance on hardwoods or MDF. Acquaduro Waterborne Primer has great ease of application and fast application and dry times.
Recommended topcoat is the Acquaduro 2K Pigmented Polyurethane Waterborne Topcoat. - spec_uses:
Acquaduro™ 1K Waterborne Neutral Primer has been designed for the cabinet, architectural millwork, furniture and refinish markets.
- Suggested Uses: Designed for use on hardwoods or MDF
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
Zahn #2 Signature cup 30-35 sec at 77º F (25º C)
- Reducer: Use water if required
- Retarder: 970-1358 1 to 3 % by Volume
- Clean-up Solvent: Water
- Recommended Wet Film: 4-6 wet mils
- Coverage:
610 sqft/gal
- Note application:
N/A
- Viscosity:
Zahn #2 Signature Cup 30-35 seconds at 77ºF (25ºC)
- Flash Point: >200°F (93.3°C)
- Density (lb/gal): 11.31
- Solid (% by weight): 56.4
- Solid (% by volume): 40.7
- Shelf Life (months): 12