Chemfill

825-3503 Chemfill Neutral

Product Codes:

825-3503 Chemfill Neutral

Surface Preparation:

The substrate must be sanded with a 120, 150 or 180 grit sand paper and free of dust and all contaminants.

General Information:

Mix well before usage. Hard settling can occur due to heavy solids content. Apply by spray after dilution or with a cloth. After 5 minutes of drying, wipe clean with a cloth in a circular motion. Allow to dry for 4 hours before applying the subsequent coat.

Reduce product will settle quickly.

To obtain complete cure, system should be applied at a temperature above 18°C and relative humidity below 65%.

PDF Name: CA-PIS_825-3503_Chemfill_Neutral

Tack Free Time: 4 hours

Files: CA-PIS_825-3503_Chemfill_Neutral.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

test: N/A

VOC less exempt g/l: 1.88

VOC g/l: 1.88

Dry to Stack: N/A

Note: N/A

Note:

See individual compliance sheets for specific data.

spec_description:

All purpose filler for furniture and cabinets.

spec_uses:

For interior use only.

Suggested Uses: By spray or with a cloth

Mixing Ratio:

N/A

Pot Life: N/A

Application Viscosity:

N/A

Reducer: 20-25% 801-1202(Varsol) or 800-4310(Solvent G) if applied by spray

Retarder: N/A

Clean-up Solvent: Lacquer Thinner

Recommended Wet Film: 2 - 4 mils wet

Coverage:

N/A

Note application:

N/A

Viscosity:

30 000-40 000 CPS @25°C

Flash Point: 27°C

Density (lb/gal): 1.52 ± 2% at 25°C

Solid (% by weight): 88%

Solid (% by volume): 78%

Shelf Life (months): 6

Chemfill

825-3503 Chemfill Neutral

Find distributor Trouver un distributeur

spec_description:

All purpose filler for furniture and cabinets.

BACK

Chemfill

825-3503 Chemfill Neutral

spec_description:

All purpose filler for furniture and cabinets.

Product codeCodes de produit
Product Codes:

825-3503 Chemfill Neutral

Product information

Product specificationsSpécifications du produit

Viscosity:

30 000-40 000 CPS @25°C

Flash Point: 27°C

Density (lb/gal): 1.52 ± 2% at 25°C

Solid (% by weight): 88%

Solid (% by volume): 78%

Shelf Life (months): 6

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: CA-PIS_825-3503_Chemfill_Neutral.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap