Hardener

999-062 D-Dur Hardener

Product Codes:

999-062 D-Dur Hardener

Surface Preparation:

N/A

General Information:

This product contains isocyanate. Take necessary precautions for the handling and use of this product. See MSDS for further information. This product is sensitive to moisture and can react with air humidity. Be sure to keep all containers tightly closed when not in use. 999-062 should not be mixed with any products containing alcohol.

Protect eyes and skin form contact. If contact with eyes, wash thoroughly with water at least 20 minutes and call a doctor.

PDF Name: CA-PIS_999-062_D-Dur_Hardener

Tack Free Time: N/A

Files: CA-PIS_999-062_D-Dur_Hardener.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

test: N/A

VOC less exempt g/l: 551

VOC g/l: 551

Dry to Stack: N/A

Note: N/A

Note:

N/A

spec_description:

Isocyanate hardener for 2K urethane system, such as D-Dur 620-1XX.

spec_uses:

For interior uses only

Suggested Uses: Spray

Mixing Ratio:

See Technical bulletin of the product to be catalyzed

Pot Life: N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: Lacquer Thinner

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: 23°C

Density (lb/gal): 1.00 ± 2% à 25ºC

Solid (% by weight): 45%

Solid (% by volume): 38%

Shelf Life (months): 3

Hardener

999-062 D-Dur Hardener

Find distributor Trouver un distributeur

spec_description:

Isocyanate hardener for 2K urethane system, such as D-Dur 620-1XX.

BACK

Hardener

999-062 D-Dur Hardener

spec_description:

Isocyanate hardener for 2K urethane system, such as D-Dur 620-1XX.

Product codeCodes de produit
Product Codes:

999-062 D-Dur Hardener

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: 23°C

Density (lb/gal): 1.00 ± 2% à 25ºC

Solid (% by weight): 45%

Solid (% by volume): 38%

Shelf Life (months): 3

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: CA-PIS_999-062_D-Dur_Hardener.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap