CHEMLACK WHITE Pigmented Topcoat

230-65XX Chemlack White NC Pigmented TC

Product Codes:

230-6520 Low Gloss

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit stearated paper prior to coating. Sealers should be sanded with 280/320 grit stearated paper prior to being coated.

General Information:

230-65XX NC Topcoat may be applied in two or more coats, depending on the desired finish. The total dry film build should not exceed 4 mils. 230-65XX NC Topcoat should be thoroughly stirred when mixed with an appropriate amount of reducer.

PDF Name: US-PIS_230-65XX_Chemlack_White_NC_Pigmented_TC

Tack Free Time: 10 – 15 minutes

Files: US-PIS_230-65XX_Chemlack_White_NC_Pigmented_TC.pdf

Dry to Sand : 30 minutes

Dry to Stack: 4 hours

Tack Free Time: Flash off before entering oven

VOC less exempt lb/gal: <5.85

Dry to Sand: 20 – 30 minutes

VOC lb/gal: <5.85

VOC less exempt g/l: <700

VOC g/l: <700

VOC lb/lb Solid: <2.30

Dry to Stack: 45 minutes

VHAPs lb/lb Solid: <0.78

Note: N/A

Note:

See individual compliance sheets for specific data

spec_description:

230-65XX NC Topcoat is a scratch resistant, single component nitrocellulose lacquer that provides good depth and a nice, smooth surface. This product provides good clarity, dries rapidly and has smooth feel when fully cured.

spec_uses:

230-65XX NC Topcoat can be used for many interior wood applications as a high quality nitrocellulose lacquer. This product can be used on all types of wood.

Suggested Uses:

Wood Finish

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

Zahn #2 signature cup 20–25 seconds

Reducer: 803-1395

Retarder: 800-5328

Clean-up Solvent: 803-1395

Recommended Wet Film: 3 – 5 mils

Coverage:

275 sq. ft/gal at 1 mil dry and at 100% transfer efficiency. Coverage will vary depending on method of application or coating thickness.

Note application:

N/A

Viscosity:

Zahn #2 signature cup 26 sec at 77°F

Flash Point: 25°F (-4°C)

Density (lb/gal): 8.49

Solid (% by weight): 30.5%

Solid (% by volume): 17.5%

Shelf Life (months): 12

CHEMLACK WHITE Pigmented Topcoat

230-65XX Chemlack White NC Pigmented TC

Find distributor Trouver un distributeur

spec_description:

BACK

CHEMLACK WHITE Pigmented Topcoat

230-65XX Chemlack White NC Pigmented TC

spec_description:

Product codeCodes de produit
Product Codes:

230-6520 Low Gloss

Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 26 sec at 77°F

Flash Point: 25°F (-4°C)

Density (lb/gal): 8.49

Solid (% by weight): 30.5%

Solid (% by volume): 17.5%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_230-65XX_Chemlack_White_NC_Pigmented_TC.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap