New Selva Pro- Selva Pro
- 420-1205 Selva Pro™ Isolante Sealer
- Product Codes:
420-1205
- Surface Preparation:
Wood must be sanded with a 120 or 150 grit paper and free of dust and all contaminants.
- General Information:
Apply 3 to 5 wet mils on a sanded surface. Let dry for 30 to 60 minutes and apply the desired topcoat. If the drying time exceeds 4 hours, sanding is required to keep a good adhesion. Once catalyzed with 876-9084, this product will contain isocyanates. Take necessary precautions for the handling and use of this product. See MSDS. AkzoNobel recommends using Promatch W/B Monocolor Spray Stains 824-50XX, Promatch Aqua Stains 824-51XX, Promatch Dye Stains 890-85XX, Promatch Vivid Wipe Stains 8255600, Promatch C-Mix Wipe Stains 825-90XX, 825-91XX.
For a complete system cure, the system must be applied at a temperature above 18ºC and relative humidity below 65%.
Complete system must be verified and approved by AkzoNobel before going on production.
- PDF Name: US-PIS_420-1205_Isolante_Sealer
- Tack Free Time: 30-60 minutes
- Files: US-PIS_420-1205_Isolante_Sealer.pdf
- Dry to Sand : 4 hours
- Dry to Stack: N/A
- Tack Free Time: 15-20 minutes
- VOC less exempt lb/gal: 5.83
- Dry to Sand: 30 minutes
- VOC lb/gal: 5.83
- VOC less exempt g/l: 698
- VOC g/l: 698
- VOC lb/lb Solid: 3.38
- Dry to Stack: N/A
- VHAPs lb/lb Solid: 0.84
- Note:
N/A
- spec_description:
Selva Pro Isolante 2K Sealer is designed to enhance adhesion on exotic or oily substrates. Its features include strong bond, barrior coat properties and ease of sandability, making it ideal for high-end wood applications.
- spec_uses:
Used as a barrior coat on exotic substrates and/or as an adhesion promoter under any Selva Pro sealers or Chemcraft's polyester sealer.
- Suggested Uses: Wood Finishes
- Mixing Ratio:
100 Parts 420-1205 with 50 Parts 876-9084 (by volume)
- Pot Life: 4 hours
- Application Viscosity:
20-22 sec Zahn #2 at 77° F (25°C)
- Reducer: 803-2000
- Retarder: N/A
- Clean-up Solvent: 800-5500 Acetone
- Recommended Wet Film: 3-5 wet mils
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
27-29 sec Zahn #2 at 77° F (25°C)
- Flash Point: 21.2° F (9° C)
- Density (lb/gal): 7.64
- Solid (% by weight): 22.8
- Solid (% by volume): 15.2
- Shelf Life (months): 24
- Selva Pro
- 536-1702 Selva™ Pro Bianco Polyurethane HS Neutral Primer
- Product Codes:
536-1702
- Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to priming. Primer should be sanded with 320 grit paper prior to being coated. The Primer should be coated within eight hours of being sanded. Appropriate topcoats are the Selva Pro Bianco 109-17XX / 109-19XX or Selva Pro Acrilico 109-47XX / 109-46XX. When recoating, the previous coat must be sanded and the next coat applied within eight hours.
- General Information:
The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener. The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.
- PDF Name: US-PIS_536-1702_Selva_Pro_Bianco_Polyurethane_HS_Neutral_Primer
- Tack Free Time: 20 minutes
- Files: US-PIS_536-1702_Selva_Pro_Bianco_Polyurethane_HS_Neutral_Primer.pdf
- Dry to Sand : 2 hours
- Dry to Stack: 24 hours
- Tack Free Time: 10 minutes
- VOC less exempt lb/gal: 4.51
- Dry to Sand: 15 minutes
- VOC lb/gal: 4.51
- VOC less exempt g/l: 541.0
- VOC g/l: 541.0
- VOC lb/lb Solid: 0.78
- Dry to Stack: 1 hour
- VHAPs lb/lb Solid: 0.17
- Note:
N/A
- spec_description:
Selva Pro Bianco PU HS Neutral Primer is a high-solids primer designed for fast drying and exceptional sandability. Designed to be tinted with 844 tints, it offers a versatile color range for premium opaque finish. With its superior build, this primer provides excellent holdout on MDF and soft woods, ensuring a smooth, high-end appearance on interior woodwork. As an ideal foundation, it supports flawless application of all Selva Pro pigmented topcoats.
- spec_uses:
Ideal for high-end kitchen and bathroom cabinetry, as well as a wide range of interior wood applications, including architectural millworks, store fixtures, and office furniture.
- Suggested Uses: Wood Finishes
- Mixing Ratio:
100 Parts 536-1702 with 50 Parts 876-9700 (by volume)
- Pot Life: 2-3 hours
- Application Viscosity:
Zahn #2 signature cup 24-26 seconds.
- Reducer: 803-2000
- Retarder: 800-2001 3-5% by volume
- Clean-up Solvent: 800-5500 Acetone
- Recommended Wet Film: 4-6 wet mils
- Coverage:
N/A
- Note application:
MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 8 DRY MILS
- Viscosity:
60-65 KU
- Flash Point: 21° F
- Density (lb/gal): 10.28
- Solid (% by weight): 56.0
- Solid (% by volume): 37.0
- Shelf Life (months): 24
- Selva Pro
- 536-1700 Selva™ Pro Bianco Polyurethane HS White Primer
- Product Codes:
536-1700
- Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to priming. Primer should be sanded with 320 grit paper prior to being coated. The Primer should be coated within eight hours of being sanded. Appropriate topcoats are the Selva Pro Bianco 109-17XX / 109-19XX or Selva Pro Acrilico 109-47XX / 109-46XX. When recoating, the previous coat must be sanded and the next coat applied within eight hours.
- General Information:
The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener. The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.
- PDF Name: US-PIS_536-1700_Selva_Pro_Bianco_Polyurethane_HS_White_Primer
- Tack Free Time: 20 minutes
- Files: US-PIS_536-1700_Selva_Pro_Bianco_Polyurethane_HS_White_Primer.pdf
- Dry to Sand : 1 hour
- Dry to Stack: 24 hours
- Tack Free Time: 10 minutes
- VOC less exempt lb/gal: 3.89
- Dry to Sand: 15 minutes
- VOC lb/gal: 3.89
- VOC less exempt g/l: 465.5
- VOC g/l: 465.5
- VOC lb/lb Solid: 0.53
- Dry to Stack: 1 hour
- VHAPs lb/lb Solid: 0.32
- Note:
N/A
- spec_description:
our high-build, fast-drying Selva Pro Bianco HS White PU Primer provides exceptional sandability and is perfect for achieving a premium opaque finish. It can be tinted with 844 tints to create a wide range of pastel shades, allowing versatility for various design needs. With its quick-build properties, this primer helps you achieve a refined, high-end look effortlessly.
- spec_uses:
Ideal for high-end kitchen and bathroom cabinetry, as well as a wide range of interior wood applications, including architectural millworks, store fixtures, and office furniture.
- Suggested Uses: Wood Finishes
- Mixing Ratio:
100 Parts 536-1700 with 50 Parts 876-9700 (by volume)
- Pot Life: 2-3 hours
- Application Viscosity:
Zahn #2 signature cup 24-26 seconds.
- Reducer: 803-2000
- Retarder: 800-2001 3-5% by volume
- Clean-up Solvent: 800-5500 Acetone
- Recommended Wet Film: 4-6 wet mils
- Coverage:
N/A
- Note application:
MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 8 DRY MILS
- Viscosity:
60-65 KU
- Flash Point: 45° F
- Density (lb/gal): 11.15
- Solid (% by weight): 65.1
- Solid (% by volume): 46.3
- Shelf Life (months): 24
- Selva Pro
- 536-1701 Selva™ Pro Bianco Polyurethane HS White Primer HH
- Product Codes:
536-1701
- Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to priming. Primer should be sanded with 320 grit paper prior to being coated. The Primer should be coated within eight hours of being sanded. Appropriate topcoats are the Selva Pro Bianco 109-17XX / 109-19XX or Selva Pro Acrilico 109-47XX / 109-46XX. When recoating, the previous coat must be sanded and the next coat applied within eight hours.
- General Information:
The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener. The relative humidity in the application and drying room should not exceed 75% for maximum coating performance. - PDF Name: US-PIS_536-1701_Selva_Pro_Bianco_Polyurethane_HS_White_Primer_HH
- Tack Free Time: 20 minutes
- Files: US-PIS_536-1701_Selva_Pro_Bianco_Polyurethane_HS_White_Primer_HH.pdf
- Dry to Sand : 1 hour
- Dry to Stack: 24 hours
- Tack Free Time: 10 minutes
- VOC less exempt lb/gal: 4.05
- Dry to Sand: 15 minutes
- VOC lb/gal: 4.05
- VOC less exempt g/l: 485.5
- VOC g/l: 485.5
- VOC lb/lb Solid: 0.57
- Dry to Stack: 1 hour
- VHAPs lb/lb Solid: 0.31
- Note:
N/A
- spec_description:
Selva Pro Bianco PU HS White Primer HH is a high-solids, high-hide white primer engineered for rapid drying and outstanding sandability. Tintable with 844 tints, it offers a wide selection of pastel shades for a premium opaque finish. Its superior build provides excellet holdout on MDF and soft woods, delivering a smooth, high-end look on all interior woodwork surfaces. Ideal as a foundation, it supports flawless application of all Selva Pro pigmented topcoats.
- spec_uses:
Ideal for high-end kitchen and bathroom cabinetry, as well as a wide range of interior wood applications, including architectural millworks, store fixtures and office furniture.
- Suggested Uses: Wood Finishes
- Mixing Ratio:
100 Parts 536-1701 with 50 Parts 876-9700 (by volume)
- Pot Life: 2-3 hours
- Application Viscosity:
Zahn #2 signature cup 24-26 seconds.
- Reducer: 803-2000
- Retarder: 800-2001 3-5% by volume
- Clean-up Solvent: 800-5500 Acetone
- Recommended Wet Film: 4-6 wet mils
- Coverage:
N/A
- Note application:
MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 8 DRY MILS
- Viscosity:
60-65 KU
- Flash Point: 45° F
- Density (lb/gal): 11.15
- Solid (% by weight): 63..5
- Solid (% by volume): 44.0
- Shelf Life (months): 24
- Selva Pro
- 436-57XX Selva™ Pro Chiaro Polyurethane Clear Topcoat
- Product Codes:
436-5705 Flat
436-5715 Matte
436-5725 Low Gloss
436-5735 Satin
436-5750 Semi-Gloss
436-5780 High Gloss - Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to staining or coating. Sealer should be sanded with 320 grit paper prior to being coated. The sealer should be coated within eight hours of being sanded. Appropriate sealer is the Selva Pro Chiaro Sealer 436-5700. When recoating, the previous coat of Chiaro must be sanded and the next coat applied within eight hours. Stain systems used under Chiaro are formulated to develop excellent grain definition.AkzoNobel recommends using Promatch® W/B Monocolor Spray Stains 824-50XX, Promatch Aqua Stains 824-51XX, Promatch Dye Stains 890-85XX or Promatch C-Mix Wipe Stains 825-90XX, 825-91XX.
- General Information:
The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information. Oil stains must be avoided because they will interfere with the adhesion. When coating exotic woods (Teak, Rosewood, etc.) a barrier coat (tie-coat) should be applied before the sealer or base coat. See Product data sheet for 420-1205 Isolante.Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener. The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.
- PDF Name: US-PIS_436-57XX_Selva_Pro_Chiaro_Polyurethane_Clear_Topcoat
- Tack Free Time: 15 minutes
- Files: US-PIS_436-57XX_Selva_Pro_Chiaro_Polyurethane_Clear_Topcoat.pdf
- Dry to Sand : 2 hours
- Dry to Stack: 24 hours
- Tack Free Time: 10 minutes
- VOC less exempt lb/gal: 4.55
- Dry to Sand: 30 minutes
- VOC lb/gal: 4.55
- VOC less exempt g/l: 545
- VOC g/l: 545
- VOC lb/lb Solid: 1.5
- Dry to Stack: 1 hour
- VHAPs lb/lb Solid: 0.52
- Note:
N/A
- spec_description:
Selva Pro Chiaro Clear Topcoat is an unltra-clear polyurethane, specially formulated for versatility and exceptional durability. With outstanding physical properites, chemcial resistance, and superior impact resistance. Chiaro provides a luxurious finish and a smooth feel. Its ease of application and rapid drying time make it an ideal choice for high-end woodwork.
- spec_uses:
An excellent choice for surfaces demanding enhanced chemical resistance, Selva Pro Chiaro is ideal for applications such as interior cabinetry, marine interiors, store fixtures, and musical instruments.
- Suggested Uses: Wood Finishes
- Mixing Ratio:
100 Parts 436-57XX with 50 Parts 876-9700 (by volume)
- Pot Life: 3-4 hours depending on temperature and humidity
- Application Viscosity:
Zahn #2 signature cup 22-25 seconds.
- Reducer: 803-2000
- Retarder: 800-2001 3-5% by volume
- Clean-up Solvent: 800-5500 Acetone
- Recommended Wet Film: 4-6 wet mils
- Coverage:
N/A
- Note application:
MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 6 DRY MILS
- Viscosity:
Zahn #3 signature cup 27-30 sec at 77° F
- Flash Point: 44.6° F
- Density (lb/gal): 8.35
- Solid (% by weight): 45.45
- Solid (% by volume): 37.25
- Shelf Life (months): 24
Need help? Contact our team of wood coating experts.
