- Verde Acrilico Acrylic Topcoat
- 109-58XX ora Verde® Acrilico White PU TC
- Product Codes:
109-5805 Flat
109-5820 Low Gloss
109-5835 Satin
109-5850 Semi-Gloss
109-5870 Gloss - Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to staining or coating. Primer should be sanded with 280/320 grit paper prior to being coated. The primer should be coated within eight hours of being sanded. Appropriate primer is the ora Verde® Bianco PU Basecoat White 536-1208 or 536-1253. When recoating, the previous coat of Acrilico White must be sanded and the next coat applied within eight hours.
- General Information:
The mixed product contains 876-9101, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener.
The relative humidity in the application and drying room should not exceed 75% for maximum coating performance. - PDF Name: US-PIS_109-58XX_ora_Verde_Acrilico_White_PU_TC
- Tack Free Time: 15 minutes
- Files: US-PIS_109-58XX_ora_Verde_Acrilico_White_PU_TC.pdf
- Dry to Sand : 4 hours
- Dry to Stack: 24 hours
- Tack Free Time: 15 minutes
- VOC less exempt lb/gal: <5.6
- Dry to Sand: 15 minutes
- VOC lb/gal: <5.6
- VOC lb/lb Solid: <1.6
- Dry to Stack: 15 minutes
- VHAPs lb/lb Solid: <0.3
- Note:
N/A
- spec_description:
Acrilico White has high durability and is formulated as a low yellowing white topcoat with good light fastness. Acrilico White takes acrylic polyurethane coatings to a new level. It is known for its luster, silky smooth feel and overall aesthetics. The Acrilico line provides superior surface and chemical resistance. The Acrilico White is the logical choice for the high end woodworking.
- spec_uses:
Acrilico White is designed for use on high end woodwork such as: cabinetry, furniture, restaurants/bars, business jet interior, luxury ship interior, etc.
- Suggested Uses:
Wood Finish
- Mixing Ratio:
100 Parts 109-58XX with 20 Parts 876-9101 (by volume)
- Pot Life:
6 hours
- Application Viscosity:
Zahn #2 signature cup 38 - 42 seconds
- Reducer: Fast 803-1410, Medium 803-1409, or slow 803-1408 if needed
- Retarder: 800-5328 3 - 5% by volume
- Clean-up Solvent: 800-5500 Acetone
- Recommended Wet Film: 3 to 5 wet mils
- Coverage:
N/A
- Note application:
MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 6.0 DRY MILS
- Viscosity:
Zahn #2 signature cup 40 sec at 77°F
- Flash Point: 39.2 °F
- Density (lb/gal): 9.09
- Solid (% by weight): 38.56%
- Solid (% by volume): 24.10%
- Shelf Life (months): 12
- LUCIDO White High Gloss PU Pigmented TC
- 109-1890 LUCIDO White High Gloss PU Pigmented TC
- Product Codes:
109-1890
- Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to staining or coating. Sealer/Primer should be sanded with 280/320 grit paper prior to being coated. The primer should be coated within eight hours of being sanded. Appropriate primer is Verde Bianco Primers 536-1253 or 536-1208 . If recoating, the previous coat must be sanded and the next coat applied within eight hours.
- General Information:
The mixed product contains 876-9068, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.
When coating exotic woods (Teak, Rosewood, etc.) a barrier coat (tie-coat) should be applied before the sealer or base coat. See Product data sheet for 401-033 Isolante.
Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener.
The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.
- PDF Name: US-PIS_109-1890_LUCIDO_White_High_Gloss_PU_Pigmented_TC
- Tack Free Time: 15 minutes
- Files: US-PIS_109-1890_LUCIDO_White_High_Gloss_PU_Pigmented_TC.pdf
- Dry to Sand : 3 hours
- Dry to Stack: 24 hours
- Tack Free Time: 15 minutes
- VOC less exempt lb/gal: <3.44
- Dry to Sand: 30 minutes
- VOC lb/gal: <3.44
- VOC lb/lb Solid: <0.44
- Dry to Stack: 60 minutes
- VHAPs lb/lb Solid: <0.10
- Note:
N/A
- spec_description:
Lucido White High Gloss is a high performance, high sheen, two-component polyurethane coating. Lucido gives excellent depth of image, hardness and chemical resistance. Extremely durable with a great finish feel.
- spec_uses:
Great choice for surfaces that require extra chemical resistance. Uses include interior marine, cabinetry, store fixture, and musical instruments.
- Suggested Uses:
Wood Finish
- Mixing Ratio:
100 Parts 109-1890 with 100 Parts 876-9068 (by volume)
- Pot Life:
3 - 4 Hours depending on temperature and humidity
- Application Viscosity:
Zahn #2 signature cup 20 - 25 seconds
- Reducer: Fast 803-5301, or slow 803-5531 if needed
- Retarder: 800-5328 3 - 5% by volume
- Clean-up Solvent: 800-5500 Acetone or Lacquer Thinners (do not mix with product)
- Recommended Wet Film: 3 to 5 wet mils
- Coverage:
N/A
- Note application:
MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 6.0 DRY MILS
- Viscosity:
Zahn #3 signature cup 30-35 sec at 77°F
- Flash Point: 25° F
- Density (lb/gal): 11.33
- Solid (% by weight): 69.7
- Solid (% by volume): 55.9
- Shelf Life (months): 12
- D-DUR White Pigmented Topcoat
- 620-10X D-Dur White PU Pigmented TC
- Product Codes:
620-104 Matte
620-108 Gloss
- Surface Preparation:
Primer should be sanded with 180 or 240 grit paper. Topcoat should be applied within 8 hours of sanding.
- General Information:
Mix the desired amount of material and apply 3 - 5 mils wet.
The relative humidity in the application and drying rooms should never exceed 70%. Viscosity on the mixed material should be monitored regularly to maintain a consistent appearance.
Mixed product will contain 999-062, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of these materials.
Total recommended film thickness of D-Dur system is not to exceed 6 mils dry.
- PDF Name: US-PIS_620-10X_D-Dur_White_PU_Pigmented_TC
- Tack Free Time: 10 - 15 minutes
- Files: US-PIS_620-10X_D-Dur_White_PU_Pigmented_TC.pdf
- Dry to Sand : 4 hours
- Dry to Stack: Overnight (Complete curing is obtained after 7 days air dry)
- Tack Free Time: 10 minutes
- VOC less exempt lb/gal: 4.27
- Dry to Sand: 2 hours
- VOC lb/gal: 4.27
- VOC lb/lb Solid: 0.68
- Dry to Stack: Overnight (Complete curing is obtained after 7 days air dry)
- VHAPs lb/lb Solid: 0.13
- Note:
N/A
- spec_description:
D-Dur White Topcoat is a thixotropic, two-component polyurethane enamel with good durability, good resistance to chemicals and good weathering properties.
- spec_uses:
This finish is recommended for wooden surfaces where good outdoor durability is desired (i.e., window frames, doors, wooden garden furniture).
- Suggested Uses:
Wood Finish
- Mixing Ratio:
4:1 with 999-062 (100 parts base to 25 parts 999-062)
- Pot Life:
Approximately 4 hours depending on conditions. Pot life is decreased when product is hot or under pressure. Viscosity should be monitored after mixing with hardener.
- Application Viscosity:
Zahn #2 signature 20 - 30 seconds
- Reducer: 800-5301
- Retarder: 800-5328
- Clean-up Solvent: Lacquer Thinner (do not mix with product)
- Recommended Wet Film: 3 - 5 wet mils
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
3000 cps at 77°F
- Flash Point: 0°F
- Density (lb/gal): 10.5
- Solid (% by weight): 60%
- Solid (% by volume): 42%
- Shelf Life (months): 12
- D-DUR White Pigmented Primer
- 621-001 D-Dur White PU Pigmented Primer
- Product Codes:
621 - 001 D-Dur Primer
- Surface Preparation:
Wood substrate should be sanded with 120, 150 or 180 grit prior to staining or coating.
- General Information:
Mix the desired amount of material and apply 3-5 mils wet.
The relative humidity in the application and drying rooms should never exceed 75%. Viscosity on the mixed material should be monitored regularly to maintain a consistent appearance.
Mixed product will contain 999-062, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of these materials.
Total recommended film thickness of D-Dur system is not to exceed 6 mils dry.
- PDF Name: US-PIS_621-001_D-Dur_White_PU_Pigmented_Primer
- Tack Free Time: 10 - 15 minutes
- Files: US-PIS_621-001_D-Dur_White_PU_Pigmented_Primer.pdf
- Dry to Sand : 4 hours
- Dry to Stack: Overnight (Complete curing is obtained after 7 days air dry)
- Tack Free Time: 10 minutes
- VOC less exempt lb/gal: 4.75
- Dry to Sand: 2 hours
- VOC lb/gal: 3.79
- VOC lb/lb Solid: 0.76
- Dry to Stack: Overnight (Complete curing is obtained after 7 days air dry)
- VHAPs lb/lb Solid: 0.33
- Note:
N/A
- spec_description:
D-Dur Primer is a rapid drying, thixotropic, two-component Polyurethane primer with good sanding capabilities. It also has good durability, good resistance to chemicals and good weathering properties.
- spec_uses:
This finish is recommended for wooden surfaces where good outdoor durability is desired (i.e., window frames, doors, wooden garden furniture). If using this product outdoors, be sure to use an exterior grade topcoat like the D-Dur line.
- Suggested Uses:
Wood Finish
- Mixing Ratio:
4:1 with 999-062(100 parts 621-001 to 25 parts 999-062)
- Pot Life:
3 hours
- Application Viscosity:
Zahn #2 signature 20 - 30 seconds
- Reducer: 800-5301
- Retarder: 800-5328
- Clean-up Solvent: Lacquer Thinner (do not mix with product)
- Recommended Wet Film: 3 - 5 wet mils
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
6500 cps at 77°F
- Flash Point: -18°C
- Density (lb/gal): 10.1
- Solid (% by weight): 54%
- Solid (% by volume): 35%
- Shelf Life (months): 12
- VERDE BIANCO Basecoat
- 536-1255 ora Verde® Bianco PU Basecoat Neutral
- Product Codes:
536-1255
- Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit paper prior to priming. Basecoat should be sanded with 280/320 grit paper prior to being coated. The Basecoat should be coated within eight hours of being sanded. Appropriate topcoat is the ora Verde Bianco 109-48XX, or ora Verde Chiaro 436-48XX. When recoating, the previous coat must be sanded and the next coat applied within eight hours.
- General Information:
The mixed product contains 876-9068, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detailed information.
Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener.
The relative humidity in the application and drying room must not exceed 75% for maximum coating performance. The hardener must not be exposed to water or solvents containing alcohol.
- PDF Name: US-PIS_536-1255_ora_Verde_Bianco_PU_Basecoat_Neutral
- Tack Free Time: 20 minutes
- Files: US-PIS_536-1255_ora_Verde_Bianco_PU_Basecoat_Neutral.pdf
- Dry to Sand : 2 hours
- Dry to Stack: 24 hours
- Tack Free Time: 10 minutes @ room temperature
- VOC less exempt lb/gal: <4.4
- Dry to Sand: 15 minutes @ 110°F
- VOC lb/gal: <4.4
- VOC lb/lb Solid: <0.72
- Dry to Stack: 15 minutes @ 140°F
- VHAPs lb/lb Solid: <0.17
- Note:
N/A
- spec_description:
Bianco is our pigmented polyurethane system; Bianco PU Basecoat Neutral is a universal primer designed to be used in conjunction with our ora Verde® line topcoats. Durable and flexible, it can be used as tinted primer to achieve deep, dark and rich colors. Builds quickly to help you achieve a high end look when your need is for an opaque color.
- spec_uses:
Developed for use in the high end kitchen cabinet market. Its durability will also allow for use in store fixture applications.
- Suggested Uses:
Wood Finish
- Mixing Ratio:
100 Parts 536-1255 with 50 Parts 876-9068 (by volume)
- Pot Life:
2 Hours
- Application Viscosity:
Zahn #2 signature cup 30 seconds
- Reducer: Fast 803-1410, Medium 803-1409, or slow 803-1408 if needed
- Retarder: 800-5328 3-5% by volume
- Clean-up Solvent: 800-5500 Acetone
- Recommended Wet Film: 3 to 5 wet mils
- Coverage:
N/A
- Note application:
MAXIMUN DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 6.0 DRY MILS
- Viscosity:
Zahn #3 signature cup 45 sec at 77°F
- Flash Point: 21°F
- Density (lb/gal): 10.5
- Solid (% by weight): 58%
- Solid (% by volume): 39%
- Shelf Life (months): 12
Need help? Contact our team of wood coating experts.
