CHEMLIFE 24 PLUS WHITE Pigmented Topcoat
117-25XX CHEMLIFE® 24 PLUS White CV Pigmented TC
Find distributor Trouver un distributeurCHEMLIFE 24 PLUS White Topcoat is an acid curing, light stable, fast drying Reactive Amino Coating (RAC) with good building properties. It gives a smooth, knock-proof and hardwearing surface resisting influence from alcohol, water, etc. Due to its 24 hour pot-life, CHEMLIFE 24 PLUS White Topcoat provides the customer with minimum waste resulting in lower production costs. It also provides very good light stability based on the type of resin used and superior vertical hang.
Special Recognition: When applied as specified, will meet required performance for the ANSI/KCMA A161.1 1990 9.0 Finish Test. Recommended: Architectural Woodwork Institute (AWI) System 5.
CHEMLIFE 24 PLUS WHITE Pigmented Topcoat
CHEMLIFE 24 PLUS White Topcoat is an acid curing, light stable, fast drying Reactive Amino Coating (RAC) with good building properties. It gives a smooth, knock-proof and hardwearing surface resisting influence from alcohol, water, etc. Due to its 24 hour pot-life, CHEMLIFE 24 PLUS White Topcoat provides the customer with minimum waste resulting in lower production costs. It also provides very good light stability based on the type of resin used and superior vertical hang.
Special Recognition: When applied as specified, will meet required performance for the ANSI/KCMA A161.1 1990 9.0 Finish Test. Recommended: Architectural Woodwork Institute (AWI) System 5.
Product Codes:
117-2505 Flat
117-2510 Matte
117-2520 Low Gloss
117-2535 Satin
117-2550 Semi-Gloss
117-2590 High Gloss
Product information
- Viscosity:
Zahn #3 signature cup 23-25 sec at 77°F
- Flash Point: 53.6°F (12°C)
- Density (lb/gal): 9.33
- Solid (% by weight): 59.91%
- Solid (% by volume): 44.8%
- Shelf Life (months): 12
Download product information sheets
These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.
Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.
Recommended for interior woodwork
Recommandé pour les boiseries intérieures
View our ranges
Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.
View our ranges
Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.