Chemfill

825-3503 Chemfill Neutral

Product Codes:

825-3503

Surface Preparation:

N/A

General Information:

Application may be by hand or spray if reduced to a spray viscosity. This filler must be wiped or sprayed into the grain and wiped clean with a clean rag to ensure good adhesion by subsequent clear coats. Allow 4 to 8 hours under heat before clear coating.

If Chemfill is being allowed to air dry only, it is recommended it be allowed to dry a minimum of 18 hours prior to clear coating.

Chemfill Neutral may be clear coated with any of the following systems: Plastofix Light 421-48XX, Danspeed Elite 424-44XX, Opticlear 431-80XX, Chemlack 441-50XX, Chemlife® 24 - 421-63XX, EVar 421-80XX, Danspeed II 424-45XX, Varicure® 431-46XX, ES Lacquer Elite 431-47XX, Opticlear 431-80XX, Airguard® 431-58XX and Chemguard II 431-70XX as well as sealers associated with these systems.

IMPORTANT: Product must be thoroughly agitated before use.

PDF Name: US-PIS_825-3503_Chemfill_Neutral

Tack Free Time: N/A

Files: US-PIS_825-3503_Chemfill_Neutral.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

VOC less exempt lb/gal: <1.80

Dry to Sand: N/A

VOC lb/gal: <1.80

VOC less exempt g/l: <204

VOC g/l: <204

VOC lb/lb Solid: <0.2

Dry to Stack: N/A

VHAPs lb/lb Solid: <0.1

Note: N/A

Note:

N/A

spec_description:

Chemfill Neutral is all-purpose neutral filler for furniture and cabinets. This product should be stirred well due to the heavy concentration of fillers. Applications may be by hand or by spray if reduced to spray viscosity. 825-3503 Chemfill Neutral can be tinted using 866 tint to a maximum of 5%.

spec_uses:

Furniture and cabinets.

Suggested Uses:

Wood Finish

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

Zahn #2 signature cup 20 – 25 seconds (spray application)

Reducer: 801-1202

Retarder: N/A

Clean-up Solvent: 800-4307

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

450 CPS at 77°F

Flash Point: 80°F (27°)

Density (lb/gal): 12.5

Solid (% by weight): 86%

Solid (% by volume): 75%

Shelf Life (months): 12

Chemfill

825-3503 Chemfill Neutral

Find distributor Trouver un distributeur

spec_description:

BACK

Chemfill

825-3503 Chemfill Neutral

spec_description:

Product codeCodes de produit
Product Codes:

825-3503

Product information

Product specificationsSpécifications du produit

Viscosity:

450 CPS at 77°F

Flash Point: 80°F (27°)

Density (lb/gal): 12.5

Solid (% by weight): 86%

Solid (% by volume): 75%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_825-3503_Chemfill_Neutral.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap