Catalyst

873-1900 Catalyst

Product Codes:

873-1900

Surface Preparation:

N/A

General Information:

Measure carefully and accurately before adding to products. Agitate when adding to recommended acid cured products.

Do not under-catalyze or over-catalyze with this product. Under catalyzation will result in slow curing or an inability of the coating to cure. Over-catalyzation will result in a brittle film.

Avoid contamination or contact with ferrous metals. Use high-grade stainless steel or appropriate plastic equipment and parts.

If catalyst comes in contact with skin, clean with soap and water immediately. If it comes in contact with the eyes, flush immediately with water for at least 15 minutes and call a doctor.

PDF Name: US-PIS_873-1900_Catalyst

Tack Free Time: N/A

Files: US-PIS_873-1900_Catalyst.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

Dry to Stack: N/A

Note: N/A

spec_description:

Designed as a catalyst for Reactive Amino Coatings (RAC) using the 275 VOC chemistry.

spec_uses:

N/A

VOC less exempt lb/gal: <5.3

VOC lb/gal: <5.3

VOC less exempt g/l: <640

VOC g/l: <640

VOC lb/lb Solid: <2.3

VHAPs lb/lb Solid: <0.00

Note:

N/A

Suggested Uses:

Catalyst

Mixing Ratio:

As recommended on Product Information Sheets

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: N/A

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: 24°F (-5°C)

Density (lb/gal): 7.6

Solid (% by weight): 30.3%

Solid (% by volume): 19.00%

Shelf Life (months): 12

Catalyst

873-1900 Catalyst

Find distributor

spec_description:

Designed as a catalyst for Reactive Amino Coatings (RAC) using the 275 VOC chemistry.

Back

Catalyst

873-1900 Catalyst

spec_description:

Designed as a catalyst for Reactive Amino Coatings (RAC) using the 275 VOC chemistry.

Product code
Product Codes:

873-1900

Product information

Product specifications

Viscosity:

N/A

Flash Point: 24°F (-5°C)

Density (lb/gal): 7.6

Solid (% by weight): 30.3%

Solid (% by volume): 19.00%

Shelf Life (months): 12

Uses

Environmental data (as supplied)

Application data

Surface Preparation

General Information

Drying Times

Find distributor

Download product information sheets

Files: US-PIS_873-1900_Catalyst.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap