423-73XX Aqualux® Post-Cat WB Clear TC

Aqualux Post-Catalyzed Topcoat is designed for interior furniture, fittings, kitchen cabinet and other wood applications.

Substrate should be sanded using 120, 150 or 180 grit sandpaper prior to staining or coating. Sealers if used should be sanded with 240, 280, and 320 grit stearated paper prior to being coated. Stain systems recommended under this product are Promatch® Aqua Wiping Stains 824-50XX, 824-51XX, 824-8012, 824-8019, Promatch C-Mix Wiping Stains 825-90XX, 825-91XX, Promatch Dye Stains 890-85XX or Promatch Aqua Dye Stains 890-12XX.

Mix material before use.  Add catalyst, mix thoroughly and reduce with water, if required.  Apply by spray at wet film builds of 4 - 5 mils.  Application and drying conditions must be at temperatures of 64° F or above and at a humidity of less than 65%.  Increased airflow and/or drying temperatures, including the use of infrared, will greatly decrease dry times.

Apply at 4 - 5 mils wet on sanded or sealed substrate.  Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper.  Second and subsequent coats must be applied the same day the previous coat is sanded.

Aqualux Post-Catalyzed Topcoat must be agitated thoroughly at all times to ensure product consistency.  Contact with metal surfaces should be avoided.

In the curing cycle, the addition of heat and air movement will shorten the drying time.

Note:  Aqualux Post-Catalyzed Topcoat must not be polluted with oil, solvent based paint or the like and should not be applied to metal surfaces.  Aqualux Post-Catalyzed Topcoat must not be sanded with steel wool between the coats.  This coating must not be used and dried at temperatures below 64° F or relative humidity above 65%.

Film build should not exceed 2 dry mils per coat.  Total film build must not exceed 4 dry mils.