CHEMSEAL Sealer

546-5006 Chemseal Amber NC Clear Sealer

Product Codes:

546-5006

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit stearated paper prior to staining or coating. Sealers should be sanded with 280/320 grit stearated paper prior to being coated.

General Information:

Chemseal Amber is applied in two or more coats; however, the dry film build should not exceed 1 – 2 mils. The dry film build of the total system should not exceed 4 mils. Chemseal Amber should be thoroughly stirred and mixed with an appropriate amount of reducer.

PDF Name: US-PIS_546-5006_Chemseal_Amber_NC_Clear_Sealer

Tack Free Time: 10 – 15 minutes

Files: US-PIS_546-5006_Chemseal_Amber_NC_Clear_Sealer.pdf

Dry to Sand : 30 - 45 minutes

Dry to Stack: 1 - 2 hours

Tack Free Time: Flash off before entering oven

VOC less exempt lb/gal: <5.00

Dry to Sand: 15 – 20 minutes

VOC lb/gal: <3.75

VOC less exempt g/l: <600

VOC g/l: <450

VOC lb/lb Solid: <1.90

Dry to Stack: 20 – 30 minutes

VHAPs lb/lb Solid: <0.002

Note: N/A

Note:

N/A

spec_description:

Chemseal Amber is a ready to use, nitrocellulose lacquer sealer. It is a single pack, conventional lacquer sealer. Chemseal Amber 546-5006 dries rapidly, powders well, and seals the substrate preparing it for the appropriate topcoat.

spec_uses:

Various interior wood applications.

Suggested Uses:

Wood Sealer

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

Zahn #2 signature cup 20 – 27 seconds

Reducer: 803-1298

Retarder: 800-5328

Clean-up Solvent: 803-1298

Recommended Wet Film: 2 – 5 mils

Coverage:

257 sq. ft/gal at 1 mil dry and at 100% transfer efficiency. Coverage will vary depending on method of application or coating thickness.

Note application:

N/A

Viscosity:

Zahn #2 signature cup 25 sec at 77°F

Flash Point: -4°F (-20°C)

Density (lb/gal): 7.4

Solid (% by weight): 27%

Solid (% by volume): 20%

Shelf Life (months): 12

CHEMSEAL Sealer

546-5006 Chemseal Amber NC Clear Sealer

Find distributor Trouver un distributeur

spec_description:

BACK

CHEMSEAL Sealer

546-5006 Chemseal Amber NC Clear Sealer

spec_description:

Product codeCodes de produit
Product Codes:

546-5006

Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 25 sec at 77°F

Flash Point: -4°F (-20°C)

Density (lb/gal): 7.4

Solid (% by weight): 27%

Solid (% by volume): 20%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_546-5006_Chemseal_Amber_NC_Clear_Sealer.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap