CHEMVINYL Sealer

546-8006 Chemvinyl 550 Clear Sealer

Product Codes:

546-8006

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit stearated paper prior to staining or coating. Chemvinyl 550 cannot be used on metal or old oil finishes. AkzoNobel recommends using 825-00XX or 825-09XX series stains or 824-50XX series waterborne stains.

General Information:

Apply at 3 – 5 wet mils on sanded substrate. Maximum film build of Chemvinyl is not to exceed 2 mil dry. Allow 45 minutes to one hour to dry at a minimum of 68°F (20°C) prior to topcoating.

Sand with 280/320 grit paper before topcoating and ensure topcoat is applied the same day the sanding is done.

Chemvinyl must be thoroughly agitated at all times to ensure product consistency.

Chemvinyl is used for sealing wooden furniture and other wood surfaces for interior use only. It can be used on all wood types and after drying and sanding, may be overcoated with acid curing systems such as Danspeed 424-44XX, 424-45XX and Plastofix Light 421-48XX. Chemvinyl may also be overcoated with pre-catalyzed materials such as Opticlear 431-80XX, EVar 421-80XX, Varicure® 431-46XX, ES Lacquer Elite II 431-47XX, Chemguard 431-70XX or ECat 431-11XX.

PDF Name: US-PIS_546-8006_Chemvinyl_550_Clear_Sealer

Tack Free Time: 5 - 10 minutes

Files: US-PIS_546-8006_Chemvinyl_550_Clear_Sealer.pdf

Dry to Sand : 10 – 20 minutes

Dry to Stack: 1 – 2 hours

Tack Free Time: Flash off before entering oven

VOC less exempt lb/gal: <4.40

Dry to Sand: 5 – 10 minutes

VOC lb/gal: <1.36

VOC less exempt g/l: <508

VOC g/l: <163

VOC lb/lb Solid: <0.9

Dry to Stack: 20 – 30 minutes

VHAPs lb/lb Solid: <0.004

Note: N/A

Note:

N/A

spec_description:

Chemvinyl 550 is a single component vinyl modified nitrocellulose sealer that provides excellent sealing properties and very rapid dry. Chemvinyl 550 was developed to improve adhesion and moisture resistance. Chemvinyl 550 is an easy sanding sealer designed for the professional applicator who requires a rapid dry, easy sanding material. The Chemvinyl 550 shows improved adhesion with various stain systems.

All nitrocellulose lacquers will yellow over time. This could become an issue if this product is used over white surfaces. This yellowing generally adds a warm patina when applied over most other colors and stains.

Recommended: Architectural Woodwork Institute Nitrocellulose Lacquer System (8^th Ed).

spec_uses:

Chemvinyl 550 is recommended for household furniture, millwork, decorative items as well as many other interior wood applications.

Suggested Uses:

Wood Sealer

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

Zahn #2 signature cup 16 seconds

Reducer: 800-5500

Retarder: 800-5742

Clean-up Solvent: 800-5500

Recommended Wet Film: 3 – 5 mils

Coverage:

Coverage is 210 sq. ft/gal at 1 mil dry and at 100% transfer efficiency. Coverage will vary depending on method of application or coating thickness.

Note application:

N/A

Viscosity:

Zahn #2 signature cup 16 sec at 77°F

Flash Point: -4° F (-20°C)

Density (lb/gal): 7.3

Solid (% by weight): 20%

Solid (% by volume): 13%

Shelf Life (months): 12

CHEMVINYL Sealer

546-8006 Chemvinyl 550 Clear Sealer

Find distributor Trouver un distributeur

spec_description:

Recommended: Architectural Woodwork Institute Nitrocellulose Lacquer System (8^th Ed).

BACK

CHEMVINYL Sealer

546-8006 Chemvinyl 550 Clear Sealer

spec_description:

Recommended: Architectural Woodwork Institute Nitrocellulose Lacquer System (8^th Ed).

Product codeCodes de produit
Product Codes:

546-8006

Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 16 sec at 77°F

Flash Point: -4° F (-20°C)

Density (lb/gal): 7.3

Solid (% by weight): 20%

Solid (% by volume): 13%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_546-8006_Chemvinyl_550_Clear_Sealer.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap