Isolante
420-1205 Isolante Sealer
Product Codes:

420-1205

Surface Preparation:

Wood must be sanded with a #120 or 150 grit paper and free of dust and all contaminants.

General Information:

Apply 3 to 5 wet mils on a sanded surface. Let dry for 30 to 60 minutes and apply the desired topcoat. If the drying time exceeds 4 hours, sanding is required to keep a good adhesion. Once catalyzed with 876-9084, this product will contain isocyanates. Take necessary precautions for the handling and use of this product. See MSDS.


For a complete system cure, the system must be applied at a temperature above 18ºC and relative humidity below 65%.


Complete system must be verified and approved by AkzoNobel before going on production.

PDF Name: US-PIS_420-1205_Isolante_Sealer
Tack Free Time: 30-60 minutes
Files: US-PIS_420-1205_Isolante_Sealer.pdf
Dry to Sand : 4 hours
Dry to Stack: N/A
Tack Free Time: 15-20 minutes
VOC less exempt lb/gal: 5.83
Dry to Sand: 30 minutes
VOC lb/gal: 5.83
VOC less exempt g/l: 698
VOC g/l: 698
VOC lb/lb Solid: 3.38
Dry to Stack: N/A
VHAPs lb/lb Solid: 0.84
Note: N/A
Note:

N/A

spec_description:

2K Polyurethane. This sealer is designed to improve the adhesion of finishes on difficult substrates like exotic wood.

spec_uses:

Used as a protective coating for wood, various plastics, oily stain.
For interior usage only

Suggested Uses: Wood Finishes
Mixing Ratio:

100 Parts 420-1205 with 50 Parts 876-9084 (by volume)

Pot Life: 4 hours
Application Viscosity:

20-22 sec Zahn #2 at 77° F (25°C)

Reducer: 803-2000
Retarder: N/A
Clean-up Solvent: 800-5500 Acetone
Recommended Wet Film: 3-5 wet mils
Coverage:

N/A

Note application:

N/A


Viscosity:

27-29 sec Zahn #2 at 77° F (25°C)

Flash Point: 21.2° F (9° C)
Density (lb/gal): 7.64
Solid (% by weight): 22.8
Solid (% by volume): 15.2
Shelf Life (months): 24
Selva Pro
536-1702 Selva™ Pro Bianco Polyurethane HS Neutral Primer
Product Codes:

536-1702

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to priming. Primer should be sanded with 280/320 grit paper prior to being coated. The Primer should be coated within eight hours of being sanded. Appropriate topcoats are the Selva Pro Bianco 109-17XX / 109-19XX or Selva Pro Acrilico 109-47XX / 109-46XX. When recoating, the previous coat must be sanded and the next coat applied within eight hours.

General Information:

The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.

Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener. The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.

PDF Name: US-PIS_536-1702_Selva_Pro_Bianco_Polyurethane_HS_Neutral_Primer
Tack Free Time: 20 minutes
Files: US-PIS_536-1702_Selva_Pro_Bianco_Polyurethane_HS_Neutral_Primer.pdf
Dry to Sand : 2 hours
Dry to Stack: 24 hours
Tack Free Time: 10 minutes
VOC less exempt lb/gal: 4.51
Dry to Sand: 15 minutes
VOC lb/gal: 4.51
VOC less exempt g/l: 541.0
VOC g/l: 541.0
VOC lb/lb Solid: 0.78
Dry to Stack: 1 hour
VHAPs lb/lb Solid: 0.17
Note: N/A
Note:

N/A

spec_description:

Bianco is our pigmented polyurethane system; Bianco PU HS Neutral Primer is a primer designed to be used in conjunction with our topcoats Selva Pro Bianco 109-17XX / 109-19XX or Selva Pro Acrilico 109-47XX / 109-46XX. Durable and flexible, it can be used as primer tinted to achieve any deep color. Builds quickly to help you achieve a high end look when your need is for an opaque color.

spec_uses:

Developed for use in the high end kitchen cabinet market. Its durability will also allow for use in store fixture applications and general millwork.

Suggested Uses: Wood Finishes
Mixing Ratio:

100 Parts 536-1702 with 50 Parts 876-9700 (by volume)

Pot Life: 2-3 hours
Application Viscosity:

Zahn #2 signature cup 24-26 seconds.

Reducer: 803-2000
Retarder: 800-2001 3-5% by volume
Clean-up Solvent: 800-5500 Acetone
Recommended Wet Film: 4-6 wet mils
Coverage:

N/A

Note application:

MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 8 DRY MILS



Viscosity:

60-65 KU

Flash Point: 21° F
Density (lb/gal): 10.28
Solid (% by weight): 56.0
Solid (% by volume): 37.0
Shelf Life (months): 24
Selva Pro
536-1700 Selva™ Pro Bianco Polyurethane HS White Primer
Product Codes:

536-1700

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to priming. Primer should be sanded with 280/320 grit paper prior to being coated. The Primer should be coated within eight hours of being sanded. Appropriate topcoats are the Selva Pro Bianco 109-17XX / 109-19XX or Selva Pro Acrilico 109-47XX / 109-46XX. When recoating, the previous coat must be sanded and the next coat applied within eight hours.

General Information:

The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.

Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener. The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.


PDF Name: US-PIS_536-1700_Selva_Pro_Bianco_Polyurethane_HS_White_Primer
Tack Free Time: 20 minutes
Files: US-PIS_536-1700_Selva_Pro_Bianco_Polyurethane_HS_White_Primer.pdf
Dry to Sand : 1 hour
Dry to Stack: 24 hours
Tack Free Time: 10 minutes
VOC less exempt lb/gal: 3.89
Dry to Sand: 15 minutes
VOC lb/gal: 3.89
VOC less exempt g/l: 465.5
VOC g/l: 465.5
VOC lb/lb Solid: 0.53
Dry to Stack: 1 hour
VHAPs lb/lb Solid: 0.32
Note: N/A
Note:

N/A

spec_description:

Bianco is our pigmented polyurethane system; Bianco HS White PU Primer is a primer designed to be used in conjunction with our topcoats Selva Pro Bianco 109-17XX / 109-19XX or Selva Pro Acrilico 109-47XX / 109-46XX. Durable and flexible, it can be used as white primer or can be tinted to achieve any pastel color in the rainbow. Builds quickly to help you achieve a high end look when your need is for an opaque color.

spec_uses:

Developed for use in the high end kitchen cabinet market. Its durability will also allow for use in store fixture applications and general millwork.

Suggested Uses: Wood Finishes
Mixing Ratio:

100 Parts 536-1700 with 50 Parts 876-9700 (by volume)

Pot Life: 2-3 hours
Application Viscosity:

Zahn #2 signature cup 24-26 seconds.

Reducer: 803-2000
Retarder: 800-2001 3-5% by volume
Clean-up Solvent: 800-5500 Acetone
Recommended Wet Film: 4-6 wet mils
Coverage:

N/A

Note application:

MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 8 DRY MILS



Viscosity:

60-65 KU

Flash Point: 45° F
Density (lb/gal): 11.15
Solid (% by weight): 65.1
Solid (% by volume): 46.3
Shelf Life (months): 24
Selva Pro
536-1701 Selva™ Pro Bianco Polyurethane HS White Primer HH
Product Codes:

536-1701

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to priming. Primer should be sanded with 280/320 grit paper prior to being coated. The Primer should be coated within eight hours of being sanded. Appropriate topcoats are the Selva Pro Bianco 109-17XX / 109-19XX or Selva Pro Acrilico 109-47XX / 109-46XX. When recoating, the previous coat must be sanded and the next coat applied within eight hours.

General Information:

The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.

Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener. The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.


PDF Name: US-PIS_536-1701_Selva_Pro_Bianco_Polyurethane_HS_White_Primer_HH
Tack Free Time: 20 minutes
Files: US-PIS_536-1701_Selva_Pro_Bianco_Polyurethane_HS_White_Primer_HH.pdf
Dry to Sand : 1 hour
Dry to Stack: 24 hours
Tack Free Time: 10 minutes
VOC less exempt lb/gal: 4.05
Dry to Sand: 15 minutes
VOC lb/gal: 4.05
VOC less exempt g/l: 485.5
VOC g/l: 485.5
VOC lb/lb Solid: 0.57
Dry to Stack: 1 hour
VHAPs lb/lb Solid: 0.31
Note: N/A
Note:

N/A

spec_description:

Bianco is our pigmented polyurethane system; Bianco PU HS White Primer HH is a primer designed to be used in conjunction with our topcoats Selva Pro Bianco 109-17XX / 109-19XX or Selva Pro Acrilico 109-47XX / 109-46XX. Durable and flexible, it can be used as white primer or can be tinted to achieve any pastel color in the rainbow. Builds quickly to help you achieve a high end look when your need is for an opaque color. Provides exceptional holdout on MDF and soft wood due to its superior build.

spec_uses:

Developed for use in the high end kitchen cabinet market. Its durability will also allow for use in store fixture applications and general millwork.

Suggested Uses: Wood Finishes
Mixing Ratio:

100 Parts 536-1701 with 50 Parts 876-9700 (by volume)

Pot Life: 2-3 hours
Application Viscosity:

Zahn #2 signature cup 24-26 seconds.

Reducer: 803-2000
Retarder: 800-2001 3-5% by volume
Clean-up Solvent: 800-5500 Acetone
Recommended Wet Film: 4-6 wet mils
Coverage:

N/A

Note application:

MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 8 DRY MILS



Viscosity:

60-65 KU

Flash Point: 45° F
Density (lb/gal): 11.15
Solid (% by weight): 63..5
Solid (% by volume): 44.0
Shelf Life (months): 24
Selva Pro
436-57XX Selva™ Pro Chiaro Polyurethane Clear Topcoat
Product Codes:

436-5705 Flat
436-5715 Matte
436-5725 Low Gloss
436-5735 Satin
436-5750 Semi-Gloss
436-5780 High Gloss

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to staining or coating. Sealer should be sanded with 280/320 grit paper prior to being coated. The sealer should be coated within eight hours of being sanded. Appropriate sealer is the Selva Pro Chiaro Sealer 436-5700. When recoating, the previous coat of Chiaro must be sanded and the next coat applied within eight hours. Stain systems used under Chiaro are formulated to develop excellent grain definition.

AkzoNobel recommends using Promatch® W/B Monocolor Spray Stains 824-50XX, Promatch Aqua Stains 824-51XX, Promatch Dye Stains 890-85XX or Promatch C-Mix Wipe Stains 825-90XX, 825-91XX.

General Information:

The mixed product contains 876-9700, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information. Oil stains must be avoided because they will interfere with the adhesion. When coating exotic woods (Teak, Rosewood, etc.) a barrier coat (tie-coat) should be applied before the sealer or base coat. See Product data sheet for 420-1205 Isolante.

Product must be thoroughly stirred before adding the hardener in the recommended ratio. The viscosity of the product should be monitored after mixing with the hardener. The relative humidity in the application and drying room should not exceed 75% for maximum coating performance.


PDF Name: US-PIS_436-57XX_Selva_Pro_Chiaro_Polyurethane_Clear_Topcoat
Tack Free Time: 15 minutes
Files: US-PIS_436-57XX_Selva_Pro_Chiaro_Polyurethane_Clear_Topcoat.pdf
Dry to Sand : 2 hours
Dry to Stack: 24 hours
Tack Free Time: 10 minutes
VOC less exempt lb/gal: 4.55
Dry to Sand: 30 minutes
VOC lb/gal: 4.55
VOC less exempt g/l: 545
VOC g/l: 545
VOC lb/lb Solid: 1.5
Dry to Stack: 1 hour
VHAPs lb/lb Solid: 0.52
Note: N/A
Note:

N/A

spec_description:

Chiaro Clear Topcoat is a universal topcoat formulated as an ultra clear polyurethane. Chiaro is a highly versatile polyurethane coating with excellent physical properties and chemical resistance. Extremely durable with a great finish feel. Chiaro also has superior impact resistance.

spec_uses:

Great choice for surfaces that require extra chemical resistance. Uses include interior marine, cabinetry, store fixtures, and musical instruments.

Suggested Uses: Wood Finishes
Mixing Ratio:

100 Parts 436-57XX with 50 Parts 876-9700 (by volume)

Pot Life: 3-4 hours depending on temperature and humidity
Application Viscosity:

Zahn #2 signature cup 22-25 seconds.

Reducer: 803-2000
Retarder: 800-2001 3-5% by volume
Clean-up Solvent: 800-5500 Acetone
Recommended Wet Film: 4-6 wet mils
Coverage:

N/A

Note application:

MAXIMUM DRY FILM THICKNESS OF THE SYSTEM MUST NOT EXCEED 6 DRY MILS

Viscosity:

Zahn #3 signature cup 27-30 sec at 77° F

Flash Point: 44.6° F
Density (lb/gal): 8.35
Solid (% by weight): 45.45
Solid (% by volume): 37.25
Shelf Life (months): 24

Need help? Contact our team of wood coating experts.

Contact us