Promatch Spray Stain Base

890-2200 Promatch Spray Stain Base

Product Codes:

890-2200

Surface Preparation:

Wood substrate must be sanded using 120, 150, or 180 grit paper prior to staining. On wood such as maple, coarser sanding, such as 150 grit, should be performed to avoid polishing of the wood surface. Hand sanding in the direction of the grain following orbital sanding will remove swirl marks.

General Information:

Product must be thoroughly agitated before use and during application for color consistency. Apply a wet coat of the spray stain on the sanded surface. Let dry a minimum of 30 minutes air dry before the application of the sealer. Keep under mixing to assure consistency of the product.

Product can be tinted with 844 tints up 10% by volume and/or with 890-12XX dyes at a maximum of 3% by volume.

PDF Name: US-PIS_890-2200_Promatch_Spray_Stain_Base

Tack Free Time: N/A

Files: US-PIS_890-2200_Promatch_Spray_Stain_Base.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

VOC less exempt lb/gal: <7.15

Dry to Sand: N/A

VOC lb/gal: <7.15

VOC less exempt g/l: <51.90

VOC g/l: <503.99

VOC lb/lb Solid: 0.00

Dry to Stack: N/A

VHAPs lb/lb Solid: 0.00

Note: N/A

Note:

See individual compliance sheets for specific data.

spec_description:

Ready to use spray stain that gives little or no grain raising. Formulated especially to be tinted with 844 colorants. Its unique solvent blend also gives the option of using dyes for the development of rich and deep colors.

spec_uses:

This product is intended for interior wood application.

Suggested Uses: Wood Stain

Mixing Ratio:

N/A

Pot Life: N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: Acetone or Lacquer Thinner

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: 25°F CC

Density (lb/gal): 7.28 +/-0.20

Solid (% by weight): 1.89

Solid (% by volume): 1.42

Shelf Life (months): 12 mo

Promatch Spray Stain Base

890-2200 Promatch Spray Stain Base

Find distributor Trouver un distributeur

spec_description:

BACK

Promatch Spray Stain Base

890-2200 Promatch Spray Stain Base

spec_description:

Product codeCodes de produit
Product Codes:

890-2200

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: 25°F CC

Density (lb/gal): 7.28 +/-0.20

Solid (% by weight): 1.89

Solid (% by volume): 1.42

Shelf Life (months): 12 mo

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_890-2200_Promatch_Spray_Stain_Base.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap