C-MIX Intermix System

825-90XX Promatch® C-Mix Base & Monocolors Solvent Base Stain

Product Codes:

825-9000 Clear Base
825-9001 Black
825-9002 Burnt Sienna
825-9003 Burnt Umber
825-9004 Dark Umber
825-9005 Red
825-9006 Raw Sienna
825-9007 Raw Umber
825-9008 Van Dyke
825-9009 White
825-9010 Bright Yellow
825-9011 Bright Red
825-9012 Black Dye
825-9013 Red Dye
825-9014 Yellow Dye

Surface Preparation:

Wood substrate should be sanded with 120, 150 or 180 grit paper prior to staining or coating. On woods such as maple, coarser sanding, such as 150 grit, should be performed to avoid polishing of the wood surface. Hand sanding in the direction of the grain following orbital sanding will remove swirl marks.

General Information:

Application may be by hand or spray. These stains must be wiped into the grain and wiped clean with a clean rag to ensure good adhesion by subsequent clear coats. If the stain is too dark, the color strength may be reduced using PromatchC-Mix Stain Base 825-9000.

Promatch 825-9000 can be tinted with Chemcraft 825-92XX tints along with universal tints like the 844 and 866 quality. The maximum recommended amount of tints to add to the stain base is:

825-92XX tints 35% by volume, 844 and 866 universal tints 20% by volume.

Promatch 825-90XX can be tinted with Chemcraft 825-92XX tints along with universal tints like the 844 and 866 quality. The maximum recommended amount of tints to add to the stain is:

825-92XX tints 15% by volume, 844 and 866 universal tints 5% by volume.

These products may be clear coated with any of the following systems: All pre-catalyzed lacquer, post-catalyzed lacquer, varnish and ora Verde from Chemcraft as well as the sealers associated with these systems.

All 825-90XX colors are acid stable. They will not change color when an acid cured Chemcraft product is used to seal and topcoat them.

These stains demonstrate good open time to allow for uniform appearance on large pieces.

Product must be thoroughly agitated before use.

PDF Name: US-PIS_825-90XX_Promatch_C-Mix_Base_Monocolors_Solvent_Base_Stain

Tack Free Time: N/A

Files: US-PIS_825-90XX_Promatch_C-Mix_Base_Monocolors_Solvent_Base_Stain.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

VOC less exempt lb/gal: 6.4 – 7.11

Dry to Sand: N/A

VOC lb/gal: 6.4 – 7.11

VOC less exempt g/l: 750 - 833

VOC g/l: 750 - 833

VOC lb/lb Solid: 2.25 – 9.8

Dry to Stack: N/A

VHAPs lb/lb Solid: <0.2

Note: N/A

Note:

N/A

spec_description:

Promatch C-Mix Stains 825-90XX are all-purpose wipe stains for furniture and cabinets. They should be mixed well due to the heavy concentration of pigments. Application may be by hand or spray. Stains are intermixable and/or reducible. Promatch C-Mix Stains 825-90XX offer a simple one step stain color base with good clarity and grain fill and ease of workability.

spec_uses:

As a stain for interior wood application.

Suggested Uses:

Wood Stain

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

N/A

Reducer: 825-9000

Retarder: 800-4310 (5 to 15 % by volume)

Clean-up Solvent: Lacquer Thinner

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: 80°F (<7°)

Density (lb/gal): 7.5 – 8.3

Solid (% by weight): 9 - 30%

Solid (% by volume): 6 - 24%

Shelf Life (months): 24

C-MIX Intermix System

825-90XX Promatch® C-Mix Base & Monocolors Solvent Base Stain

Find distributor Trouver un distributeur

spec_description:

BACK

C-MIX Intermix System

825-90XX Promatch® C-Mix Base & Monocolors Solvent Base Stain

spec_description:

Product codeCodes de produit
Product Codes:

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: 80°F (<7°)

Density (lb/gal): 7.5 – 8.3

Solid (% by weight): 9 - 30%

Solid (% by volume): 6 - 24%

Shelf Life (months): 24

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_825-90XX_Promatch_C-Mix_Base_Monocolors_Solvent_Base_Stain.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap