PROMATCH® Aqua Waterborne Spray Stain Base
824-2912 Promatch® Aqua Waterborne Spray Stain Base
Product Codes:

824-2912

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit paper prior to staining.

General Information:

Maximum tint load, 10% maximum

PDF Name: US-PIS_824-2912_Promatch_Aqua_Waterborne_Spray_Stain_Base
Tack Free Time: N/A
Files: US-PIS_824-2912_Promatch_Aqua_Waterborne_Spray_Stain_Base.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
VOC less exempt lb/gal: <1.8
Dry to Sand: N/A
VOC lb/gal: <0.2
VOC less exempt g/l: <220
VOC g/l: <25
VOC lb/lb Solid: <0.25
Dry to Stack: N/A
VHAPs lb/lb Solid: <0.02
Note: N/A
Note:

N/A

spec_description:

Promatch Waterborne Spray Stain Base is a stain base that can be tinted to any color using 896, 888, 877 colorants, and Promatch Aqua Dye.

spec_uses:

Used as a clear base to develop spray stain colors.

Suggested Uses:

As a clear base to develop spray stain colors

Mixing Ratio:

N/A

Pot Life: N/A
Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: Water
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

N/A

Viscosity:

Zahn#2 15 -18 seconds

Flash Point: >200 ºF
Density (lb/gal): 8.41
Solid (% by weight): 7.88%
Solid (% by volume): 6.58%
Shelf Life (months): 6

PROMATCH® Aqua Waterborne Spray Stain Base

824-2912 Promatch® Aqua Waterborne Spray Stain Base

Find distributor Trouver un distributeur

spec_description:

Promatch Waterborne Spray Stain Base is a stain base that can be tinted to any color using 896, 888, 877 colorants, and Promatch Aqua Dye.

Read more

PROMATCH® Aqua Waterborne Spray Stain Base

824-2912 Promatch® Aqua Waterborne Spray Stain Base

spec_description:

Promatch Waterborne Spray Stain Base is a stain base that can be tinted to any color using 896, 888, 877 colorants, and Promatch Aqua Dye.

Read more
Product codeCodes de produit
Product Codes:

824-2912


Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn#2 15 -18 seconds

Flash Point: >200 ºF
Density (lb/gal): 8.41
Solid (% by weight): 7.88%
Solid (% by volume): 6.58%
Shelf Life (months): 6

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us