117-24XX Chemlife® 24 White Conversion Varnish Pigmented TC

This product is used as the final coat over wood, plywood, chipboard, etc., meant for interior use.  This product is recommended for kitchen cabinets, high build office or residential furniture as well as many other interior wood applications where high build and durability are required. 

Primer should be sanded using 240 and 320 grit stearated paper. Suitable primer is Chemlife 24 White Primer 522-2400. The primer should be topcoated within eight hours of sanding. Care should be taken during sanding to avoid sanding through the primer.

Catalyze and reduce the material as recommended.  Chemlife 24 White is applied in one or two coats and can be used on all kinds of wood meant for interior use. 

A thorough sanding between the coats is essential to the adhesion.  The second and subsequent coats must be applied the same day as the previous coat is sanded.  Chemlife 24 White cannot be used on metal, old oil or cellulose lacquers.

Total recommended film build of Chemlife 24 White Primer 522-2400 and Chemlife 24 White 117-24XX is not to exceed 6 mils dry.  Over the primer, the topcoat should not exceed 4 mils dry.

To ensure proper sheen, the catalyzed material should be agitated at all times.  Chemlife 24 White must be thoroughly stirred while adding catalyst and thinner in the recommended mixing ratio.  Contact with metal surfaces should be avoided once the Chemlife 24 White has been catalyzed.

Chemlife 24 White must not be polluted with oil, varnish or the like and must not be sanded with steel wool between coats.  Chemlife 24 White must not be used and dried at temperatures below 65°F (18°C) or relative humidity above 65%.  During the curing process, the coating must not be exposed to ammonia vapors.  Ammonia cleaners should not be used for cleaning the finished surface.  This may accelerate discoloration.