CHEMBASE Pigmented Primer

545-2701 Chembase 550 Black NC Pigmented Primer

Product Codes:

545-2701

Surface Preparation:

Substrate must be sanded using 120, 150 or 180 grit stearated paper prior to coating. Chembase 550 Black should be sanded prior to being topcoated with 280/320 grit stearated paper. Appropriate topcoats are Chemlack 550 Black 230-27XX. Chembase 550 Black cannot be used on metal or old oil finishes.

General Information:

Agitate material before use. Chembase 550 Black must be agitated thoroughly at all times to ensure product consistency and consistent gloss.

Apply at 3-5 mils wet on sanded substrate. A further coat may be applied after complete drying followed by sanding with 280/320 grit stearated paper.

Maximum film build of Chembase 550 Black should not exceed 3 mils dry. Maximum film build of total coating system must not exceed 4 mils dry.

Chembase 550 Black should not be used and dried at temperatures below 64°F or relative humidity above 65%.

PDF Name: US-PIS_545-2701_Chembase_550_Black_NC_Pigmented_Primer

Tack Free Time: 15 minutes

Files: US-PIS_545-2701_Chembase_550_Black_NC_Pigmented_Primer.pdf

Dry to Sand : 30 – 45 minutes

Dry to Stack: 2 – 3 hours

Tack Free Time: Flash off before entering oven

VOC less exempt lb/gal: <4.60

Dry to Sand: 20 – 30 minutes

VOC lb/gal: <2.30

VOC less exempt g/l: <550

VOC g/l: <275

VOC lb/lb Solid: <0.90

Dry to Stack: 60 – 90 minutes

VHAPs lb/lb Solid: <0.20

Note: N/A

Note:

N/A

spec_description:

Chembase 550 Black is a single component nitrocellulose basecoat/primer that provides good build and hide. Chembase 550 Black is a quality coating designed for the professional applicator who requires an easy to handle product. Chembase 550 Black is supplied at a ready to spray viscosity. This coating will dry quickly and sand easily. Chembase 550 Black may be used for many interior wood applications.

Recommended: Architectural Woodwork Institute Nitrocellulose Lacquer System (8^th Ed).

spec_uses:

Chembase 550 Black is a recommended primer for Chemcraft Chemlack 550 Black nitrocellulose lacquer. This system is designed for millwork, household furniture, decorative items as well as many other interior wood applications.

Suggested Uses:

Wood Primer

Mixing Ratio:

N/A

Pot Life:

N/A

Application Viscosity:

Zahn #2 signature cup 22 – 30 seconds

Reducer: 800-5500

Retarder: 800-5742

Clean-up Solvent: 800-5500

Recommended Wet Film: 3 – 5 mils

Coverage:

Coverage is 336 sq. ft/gal at 1 mil dry and at 100% transfer efficiency. Coverage will vary depending on method of application or coating thickness.

Note application:

N/A

Viscosity:

Zahn #2 signature cup 30 sec at 77°F

Flash Point: -4° F (-20°C)

Density (lb/gal): 7.96

Solid (% by weight): 33.5%

Solid (% by volume): 21%

Shelf Life (months): 12

CHEMBASE Pigmented Primer

545-2701 Chembase 550 Black NC Pigmented Primer

Find distributor Trouver un distributeur

spec_description:

Recommended: Architectural Woodwork Institute Nitrocellulose Lacquer System (8^th Ed).

BACK

CHEMBASE Pigmented Primer

545-2701 Chembase 550 Black NC Pigmented Primer

spec_description:

Recommended: Architectural Woodwork Institute Nitrocellulose Lacquer System (8^th Ed).

Product codeCodes de produit
Product Codes:

545-2701

Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 30 sec at 77°F

Flash Point: -4° F (-20°C)

Density (lb/gal): 7.96

Solid (% by weight): 33.5%

Solid (% by volume): 21%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: US-PIS_545-2701_Chembase_550_Black_NC_Pigmented_Primer.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap