423-4600 Aqualux® Uniclear WB Clear Sealer

Aqualux Uniclear Sealer is designed for interior furniture, fittings, kitchen cabinet and other wood applications.

Substrate should be sanded using 120, 150 or 180 grit sandpaper prior to staining or coating. Aqualux Uniclear Sealer should be sanded with 240, 280, and 320 grit stearated paper prior to being coated. Stain systems recommended under this product are Chemcraft Waterborne wiping stains 824-XXXX.

Mix material before use. Add water to reduce, if required, and mix thoroughly. Apply by spray at wet film builds of 4 - 5 mils. Aqualux Uniclear can be used under 423-46XX. Application and drying conditions must be at temperatures of 18°C or above and at a humidity of less than 65%. Increased airflow and/or drying temperatures, including the use of infrared, will greatly decrease dry times.
Aqualux Uniclear Sealer must be agitated thoroughly at all times to ensure product consistency. Contact with metal surfaces should be avoided.

Note: Aqualux Uniclear Sealer must not be polluted with oil, solvent based paint or the like and should not be applied to metal surfaces. Aqualux Uniclear Sealer must not be sanded with steel wool between the coats. Film build should not exceed 2 dry mils per coat. Total film build must not exceed 4 dry mils.