423-46XX Aqualux® Uniclear WB Clear Topcoat

Aqualux Uniclear Topcoat is designed for interior furniture, fittings, kitchen cabinet and other wood applications.

Substrate should be sanded using 120, 150 or 180 grit sandpaper prior to staining or coating. Sealers if used should be sanded with 240, 280, and 320 grit stearated paper prior to being coated. Stain systems recommended under this product are Chemcraft Waterborne wiping stains 824-XXXX.

Mix material before use. Add water to reduce, if required, and mix thoroughly. Apply by spray at wet film builds of 4 - 5 mils. Aqualux Uniclear Topcoat can be used over 423-4600 and 423-4610 as a sealer. Application and drying conditions must be at temperatures of 18°C or above and at a humidity of less than 65%. Increased airflow and/or drying temperatures, including the use of infrared, will greatly decrease dry times.

Second and subsequent coats must be applied the same day the previous coat is sanded. Aqualux Uniclear must be agitated thoroughly at all times to ensure product consistency. Contact with metal surfaces should be avoided. In the curing cycle, the addition of heat and air movement will shorten the drying time.

Note: Aqualux Uniclear must not be polluted with oil, solvent based paint or the like and should not be applied to metal surfaces. Aqualux Uniclear must not be sanded with steel wool between the coats. Film build should not exceed 2 dry mils per coat. Total film build must not exceed 4 dry mils.