New Selva Pro- Glaze
- 825-1892 Chemglaze Clear
- Product Codes:
825-1892
- Surface Preparation:
Substrate must be sanded using 120, 150 or 180 grit stearated paper prior to glazing. Sealers should be sanded immediately prior to being coated with 280/320 grit stearated paper.
- General Information:
Prior to use, mix Chemglaze Clear carefully and reduce viscosity by adding approximately 50-100% reducer. Apply the reduced Chemglaze Clear by spraying or with a rag. Allow two to three minutes air drying before wiping. Wipe clean and do not leave on any excess material that may interfere with optimum adhesion. Chemglaze Clear must be thoroughly agitated to ensure product consistency.
Wipe on using a clean dry rag or spray on. Leave 2 - 3 minutes and wipe off. Air dry 45 to 60 minutes or air dry for 15 minutes at room temperature followed by at least 15 minutes at 158˚F. The customer is resonsible for following the recommended application precedures. Failure to adhere to the recommendations given in this Technical Data Sheet will likely result in unstaisfactory film appearance or film failure. The completed coating system should be checked for required properties prior to start-up of production. Product must be thoroughly agitated before use.
- PDF Name: US-PIS_825-1892_Chemglaze_Clear
- Tack Free Time: N/A
- Files: US-PIS_825-1892_Chemglaze_Clear.pdf
- Dry to Sand : N/A
- Dry to Stack: N/A
- Tack Free Time: N/A
- VOC less exempt lb/gal: 5.31
- Dry to Sand: N/A
- VOC lb/gal: 5.31
- VOC less exempt g/l: 637
- VOC g/l: 637
- VOC lb/lb Solid: 2.29
- Dry to Stack: N/A
- VHAPs lb/lb Solid: 0.27
- Note:
N/A
- spec_description:
Chemglaze clear 825-1892 is an all-purpose neutral glaze for furniture and cabinets.
- spec_uses:
Used for coloring and enhancing the natural beauty of the wood
- Suggested Uses:
Wood Glaze
- Mixing Ratio:
N/A
- Pot Life: N/A
- Application Viscosity:
N/A
- Reducer: 801-1202
- Retarder: N/A
- Clean-up Solvent: Lacquer Thinner
- Recommended Wet Film: N/A
- Coverage:
N/A
- Note application:
N/A
- Viscosity:
2350 cps
- Flash Point: 60.8°F (16°C)
- Density (lb/gal): 7.64
- Solid (% by weight): 30.4%
- Solid (% by volume): 21.2%
- Shelf Life (months): 12
Need help? Contact our team of wood coating experts.
