Chemlife
421-63XX Chemlife® 24 Conversion Varnish Clear Topcoat
Product Codes:

421-6303 0°   Ultra Flat
421-6310
10° Matte
421-6320 20° Low Gloss
421-6335 35° Satin
421-6350 50° Semi-Gloss
421-6390 90° High Gloss

Surface Preparation:

Substrate must be sanded using 120 or 150 grit stearated paper prior to staining or coating. Sealers, if used, should be sanded with 240, 280 and 320 grit stearated paper prior to being coated. The substrate as well as the sealers should be topcoated within eight hours of being sanded. Chemlife 24 cannot be used on metal, old oil or cellulose lacquers. Stain system used under acid catalyzed systems should be acid stable.

General Information:

Catalyze and reduce the material as recommended. Chemlife 24 is applied in one to three coats on all kinds of wood meant for indoor use. Thorough sanding between the coats is a must for good adhesion. The second and subsequent coats must be applied the same day as the previous coat is sanded. Contact with metal surfaces should be avoided once the Chemlife 24 has been catalyzed. To ensure proper sheen, the catalyzed material should be agitated at all times. Total recommended film thickness must not exceed 4 mils dry.

Chemlife 24 demonstrates excellent resistance to marring, dry heat, moisture, household and office liquids, etc. When this product is used as its own sealer, its special formulation ensures excellent filling and easy sanding properties with superior holdout for subsequent coating. Chemlife 24 must not be polluted with oil and must not be sanded with steel wool between coats.

To obtain complete cure, Chemlife 24 must be applied at a temperature above 18ºC and relative humidity below 65%. When drying, this product should not be exposed to ammonia vapors. Finished surface must not be cleaned with ammonia containing products. Always use containers and equipment made of plastic or stainless steel to avoid discoloration of the material due to oxidation.

421-63XX can be used as a self-seal or with following sealers: 401-004 catalyzed, 401-028 catalyzed, 421-6300, 432-1220 and 546-5192.

PDF Name: CA-PIS_421-63XX_Chemlife_24_Conversion_Varnish_Clear_Topcoat
Tack Free Time: 15 minutes
Files: CA-PIS_421-63XX_Chemlife_24_Conversion_Varnish_Clear_Topcoat.pdf
Dry to Sand : 60 minutes
Dry to Stack: Overnight
Tack Free Time: Flash off before entering oven
Dry to Sand: 30 minutes
VOC less exempt g/l: 584
VOC g/l: 584
Dry to Stack: 3 hours
Note: N/A
Note:

See individual compliance sheets for specific data

spec_description:

Chemlife 24 is a high quality varnish that delivers superior chemical resistance with ease of application. Due to its 24 hour pot-life, Chemlife 24 provides the customer with minimum waste resulting in lower production costs. It also provides superior vertical hang and excellent clarity.

Special recognition: Meets Kitchen Cabinet Manufacturer Association (KCMA) Standards Recommended: Meets Architectural Woodwork Institute (AWI) TR6 Performance standard for chemical and moisture resistance.

spec_uses:

This product is recommended for kitchen cabinets, high build office or residential furniture as well as other interior wood applications.

Suggested Uses:

Spray

Mixing Ratio:

10% 873-1251

Pot Life: 24 hours
Application Viscosity:

20-24 sec Zahn #2 at 25°C

Reducer: 121-803 or 121-8020 if necessary
Retarder: 800-5328 EEP (2-3% maximum)
Clean-up Solvent: Lacquer Thinner
Recommended Wet Film: 3-4 wet mils
Coverage:

12 m2/l (130 pi2/l) at 1 mil dry and at 100% transfer efficiency. Coverage will varydepending on method of application or coating thickness.

Note application:

N/A

Viscosity:

Zahn #2 signature cup 26 sec at 25°

Flash Point: 7°C
Density (lb/gal): 0.96 ± 2% at 25°C
Solid (% by weight): 39%
Solid (% by volume): 31%
Shelf Life (months): 12

Chemlife

421-63XX Chemlife® 24 Conversion Varnish Clear Topcoat

Find distributor Trouver un distributeur

spec_description:

Chemlife 24 is a high quality varnish that delivers superior chemical resistance with ease of application. Due to its 24 hour pot-life, Chemlife 24 provides the customer with minimum waste resulting in lower production costs. It also provides superior vertical hang and excellent clarity.

Special recognition: Meets Kitchen Cabinet Manufacturer Association (KCMA) Standards Recommended: Meets Architectural Woodwork Institute (AWI) TR6 Performance standard for chemical and moisture resistance.

Read more

Chemlife

421-63XX Chemlife® 24 Conversion Varnish Clear Topcoat

spec_description:

Chemlife 24 is a high quality varnish that delivers superior chemical resistance with ease of application. Due to its 24 hour pot-life, Chemlife 24 provides the customer with minimum waste resulting in lower production costs. It also provides superior vertical hang and excellent clarity.

Special recognition: Meets Kitchen Cabinet Manufacturer Association (KCMA) Standards Recommended: Meets Architectural Woodwork Institute (AWI) TR6 Performance standard for chemical and moisture resistance.

Read more
Product codeCodes de produit
Product Codes:

421-6303 0°   Ultra Flat
421-6310
10° Matte
421-6320 20° Low Gloss
421-6335 35° Satin
421-6350 50° Semi-Gloss
421-6390 90° High Gloss


Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 26 sec at 25°

Flash Point: 7°C
Density (lb/gal): 0.96 ± 2% at 25°C
Solid (% by weight): 39%
Solid (% by volume): 31%
Shelf Life (months): 12

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us