Catalyst
873-2400 Catalyst (999-017A)
Product Codes:

873-2400 Catalyst

Surface Preparation:

N/A

General Information:

Measure carefully and accurately before adding to products. Agitate when adding to recommended acid cured products.

Refer to Technical Bulletin of the product to be catalyzed. Do not under-catalyze or over-catalyze with this product. Under catalyzation will result in slow curing or an inability of the coating to cure. Over-catalyzation will result in a brittle film.

Avoid contamination or contact ferrous metals. Use high-grade stainless steel or appropriate plastic equipment and parts.

This product is corrosive. Protect eyes and skin from contact or splash. In case of accident, wash immediately with plenty of water for 20 minutes and call a doctor.

PDF Name: CA-PIS_873-2400_Catalyst_(999-017A)
Tack Free Time: N/A
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
Dry to Sand: N/A
VOC less exempt g/l: 694
VOC g/l: 694
Dry to Stack: N/A
Note: N/A
Note:

N/A

spec_description:

Catalyst for acid catalyzed sealer and topcoat.

spec_uses:

This product cannot be use alone.  Please refer to technical data sheet of product to be catalyzed.  For interior usage only.

Suggested Uses: N/A
Mixing Ratio:

As recommended on Product Information Sheets

Pot Life: N/A
Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: Lacquer Thinner
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

See individual compliance sheets for specific data

Viscosity:

N/A

Flash Point: -4°C (39°F)
Density (lb/gal): 0.92 ± 2% at 25°C
Solid (% by weight): 24%
Solid (% by volume): 15%
Shelf Life (months): 6

Catalyst

873-2400 Catalyst (999-017A)

Find distributor Trouver un distributeur

spec_description:

Catalyst for acid catalyzed sealer and topcoat.

Read more

Catalyst

873-2400 Catalyst (999-017A)

spec_description:

Catalyst for acid catalyzed sealer and topcoat.

Read more
Product codeCodes de produit
Product Codes:

873-2400 Catalyst


Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: -4°C (39°F)
Density (lb/gal): 0.92 ± 2% at 25°C
Solid (% by weight): 24%
Solid (% by volume): 15%
Shelf Life (months): 6

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us