Varicure
431-46XX Varicure® Pre-Cat Clear Topcoat
Find distributor Trouver un distributeurVaricure is a one-component high solids Pre-Catalyzed Reactive Amino Coating (RAC). This is a fast building Pre-Catalyzed RAC due to its high volume solids (23%). Varicure demonstrates very good moisture, household wear, household chemical, solvent and mar resistance. Varicure has very fast hardness development resulting in early print resistance and packaging. Varicure is supplied at a ready to spray viscosity. This coating will dry quickly and sand easily.
Special Recognition: Meets Kitchen Cabinet Manufacturer Association (KCMA) Standards.Recommended: Architectural Woodwork Institute (AWI). T.R.2.
Varicure
Varicure is a one-component high solids Pre-Catalyzed Reactive Amino Coating (RAC). This is a fast building Pre-Catalyzed RAC due to its high volume solids (23%). Varicure demonstrates very good moisture, household wear, household chemical, solvent and mar resistance. Varicure has very fast hardness development resulting in early print resistance and packaging. Varicure is supplied at a ready to spray viscosity. This coating will dry quickly and sand easily.
Special Recognition: Meets Kitchen Cabinet Manufacturer Association (KCMA) Standards.Recommended: Architectural Woodwork Institute (AWI). T.R.2.
Product Codes:
431-4610 10° Matte
431-4620 20° Low Gloss
431-4635 35° Satin
431-4650 50° Semi-Gloss
431-4690 90° High Gloss
Product information
- Viscosity:
Zahn #2 signature cup 22 sec at 25°C
- Flash Point: -20°C (-4°F)
- Density (lb/gal): 0.94
- Solid (% by weight): 30%
- Solid (% by volume): 23%
- Shelf Life (months): 12
Download product information sheets
These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.
Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.
Recommended for interior woodwork
Recommandé pour les boiseries intérieures
View our ranges
Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.
View our ranges
Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.