Promatch®

890-4041 Promatch® Solvent Borne Spray Stain Base

Product Codes:

890-4041 Spray stain base

Surface Preparation:

The substrate must be sanded with a #120, 150 or 180 grit sand paper and free of dust and all contaminants.

General Information:

Product must be thoroughly agitated before use and during application for color consistency.

Apply a wet coat of the spray stain on the sanded surface. Let dry a minimum of 10 minutes air dry before the application of the sealer. Keep under mixing to assure consistency of the product.

Can be tinted with 844 tints and/or with dyes at a maximum of 15% volume.

PDF Name: CA-PIS_890-4041_Promatch_Solvent_Borne_Spray_Stain_Base

Tack Free Time: 10 minutes

Files: CA-PIS_890-4041_Promatch_Solvent_Borne_Spray_Stain_Base.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

VOC less exempt g/l: 858

VOC g/l: 858

Dry to Stack: N/A

Note: N/A

Note:

See individual compliance sheets for specific data

spec_description:

Ready to use spray stain that gives little or no grain raising. Formulated especially to be tinted with 844 colorants. Its unique solvent blend also gives the option of using dyes for the development of rich and deep colors.

spec_uses:

890-4041 is a spray stain base that gives you the opportunity to develop a variety of colors for interior wood application.

Suggested Uses: Spray

Mixing Ratio:

N/A

Pot Life: N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: Lacquer Thinner

Recommended Wet Film: 2 - 4 mils wet

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: -3°C (26°F)

Density (lb/gal): 0.86 ± 2% at 25°C

Solid (% by weight): 0%

Solid (% by volume): 0%

Shelf Life (months): 24

Promatch®

890-4041 Promatch® Solvent Borne Spray Stain Base

Find distributor Trouver un distributeur

spec_description:

BACK

Promatch®

890-4041 Promatch® Solvent Borne Spray Stain Base

spec_description:

Product codeCodes de produit
Product Codes:

890-4041 Spray stain base

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: -3°C (26°F)

Density (lb/gal): 0.86 ± 2% at 25°C

Solid (% by weight): 0%

Solid (% by volume): 0%

Shelf Life (months): 24

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: CA-PIS_890-4041_Promatch_Solvent_Borne_Spray_Stain_Base.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap