420-1205 Isolante Sealer Neutre

Isolante is normally used as a washcoat applied directly to the substrate in order to ensure good adhesion and oil blocking properties. It is suitable for all types of wood, MDF, veneers and some type of plastic.

Wood must be sanded with a 120 or 150 grit paper and free of dust and all contaminants. Plastic substrates should be scuffed with Scotch Brite to improve adhesion. Substrates that cannot be sanded should be wiped clean and degreased if possible.

Mix product with hardener. Apply 2 to 4 wet mils on a sanded surface. Let dry for 30 to 60 minutes and apply the desired topcoat. If the drying time exceeds 4 hours, sanding is required to keep a good adhesion. This product can be tinted with 844 tints and dyes. Once catalyzed with 876-9084, this product will contain isocyanates. Take necessary precautions for the handling and use of this product. See MSDS. Total dry film build of Isolante should not exceed 1 dry mil. The total system build will be dependent upon the topcoat applied.

For a complete system cure, the system must be applied at a temperature above 18ºC and relative humidity below 65%.

Complete system must be verified and approved by AkzoNobel before going on production.

Isolante is recommended with the following topcoat: 458-1260, 436-1399. Others may be recommended as well, speak with your technical sales representative.