Wash-up Solvent
121-000 Wash-up Solvent
Product Codes:

121-000 Wash-up Solvent

Surface Preparation:

N/A

General Information:

N/A

PDF Name: CA-PIS_121-000_Wash-up_Solvent
Tack Free Time: N/A
Files: CA-PIS_121-000_Wash-up_Solvent.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
Dry to Sand: N/A
VOC less exempt g/l: 843
VOC g/l: 727
Dry to Stack: N/A
Note: N/A
Note:

See individual compliance sheets for specific data

spec_description:

Effective, economical blend of solvents designed for general use in clean-up.  Because of the high levels of aromatic solvents in 121-000, it should not be used as a thinner for paints, as it may be incompatible.

spec_uses:

For interior usage only

Suggested Uses: N/A
Mixing Ratio:

N/A

Pot Life: N/A
Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: -20°C
Density (lb/gal): 0.84 ± 2% at 25°C
Solid (% by weight): 0%
Solid (% by volume): 0%
Shelf Life (months): 12

Wash-up Solvent

121-000 Wash-up Solvent

Find distributor Trouver un distributeur

spec_description:

Effective, economical blend of solvents designed for general use in clean-up.  Because of the high levels of aromatic solvents in 121-000, it should not be used as a thinner for paints, as it may be incompatible.

Read more

Wash-up Solvent

121-000 Wash-up Solvent

spec_description:

Effective, economical blend of solvents designed for general use in clean-up.  Because of the high levels of aromatic solvents in 121-000, it should not be used as a thinner for paints, as it may be incompatible.

Read more
Product codeCodes de produit
Product Codes:

121-000 Wash-up Solvent


Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: -20°C
Density (lb/gal): 0.84 ± 2% at 25°C
Solid (% by weight): 0%
Solid (% by volume): 0%
Shelf Life (months): 12

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us