Flattening Paste

151-039 Flattening Paste

Product Codes:

151-039 Flattening Paste

Surface Preparation:

N/A

General Information:

Incorporate under agitation at the recommended ratio.

PDF Name: CA-PIS_151-039_Flattening_Paste

Tack Free Time: N/A

Files: CA-PIS_151-039_Flattening_Paste.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

test: N/A

VOC less exempt g/l: 802

VOC g/l: 802

Dry to Stack: N/A

Note: N/A

Note:

See individual compliance sheets for specific data

spec_description:

Silica dispersion to adjust gloss of lacquer and varnish

spec_uses:

For interior usage only

Suggested Uses: N/A

Mixing Ratio:

N/A

Pot Life: N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: N/A

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: -6°C(21°F)-26°C(78°F)

Density (lb/gal): 0.92 ± 2% at 25°C

Solid (% by weight): 13%

Solid (% by volume): 6%

Shelf Life (months): 12

Flattening Paste

151-039 Flattening Paste

Find distributor Trouver un distributeur

spec_description:

Silica dispersion to adjust gloss of lacquer and varnish

BACK

Flattening Paste

151-039 Flattening Paste

spec_description:

Silica dispersion to adjust gloss of lacquer and varnish

Product codeCodes de produit
Product Codes:

151-039 Flattening Paste

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: -6°C(21°F)-26°C(78°F)

Density (lb/gal): 0.92 ± 2% at 25°C

Solid (% by weight): 13%

Solid (% by volume): 6%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: CA-PIS_151-039_Flattening_Paste.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap