Varsol

801-1202 Varsol (100-104) (011-0300)

Product Codes:

801-1202 Varsol

Surface Preparation:

N/A

General Information:

N/A

PDF Name: CA-PIS_801-1202_Varsol_(100-104)_(011-0300)

Tack Free Time: N/A

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

test: N/A

VOC less exempt g/l: 780

VOC g/l: 780

Dry to Stack: N/A

Note: N/A

Note:

See individual compliance sheets for specific data.

spec_description:

Varsol is an aliphatic hydrocarbon solvent with a slow evaporation rate.

spec_uses:

Slow reducer for glaze and oil based wiping stain and coatings. Varsol is also referred to as Mineral spirits or Stoddard solvent.

Suggested Uses: N/A

Mixing Ratio:

See Technical bulletin of the product to be reduced

Pot Life: N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: N/A

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: 40°C

Density (lb/gal): 0.78 ± 2% at 25°C

Solid (% by weight): 0%

Solid (% by volume): 0%

Shelf Life (months): Unlimited

Varsol

801-1202 Varsol (100-104) (011-0300)

Find distributor Trouver un distributeur

spec_description:

Varsol is an aliphatic hydrocarbon solvent with a slow evaporation rate.

BACK

Varsol

801-1202 Varsol (100-104) (011-0300)

spec_description:

Varsol is an aliphatic hydrocarbon solvent with a slow evaporation rate.

Product codeCodes de produit
Product Codes:

801-1202 Varsol

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: 40°C

Density (lb/gal): 0.78 ± 2% at 25°C

Solid (% by weight): 0%

Solid (% by volume): 0%

Shelf Life (months): Unlimited

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap