Selva™ Pro
870-1700 Selva™ Pro Flattening Paste
Product Codes:

870-1700

Surface Preparation:

N/A

General Information:

Agitate product thoroughly before use. Add to product while under agitation and reduce gloss as required. Flattening Paste 870-1700 must be mixed thoroughly with the coating to ensure consistency of gloss. Air mixers are recommended to achieve uniformresults. Mix for 10 – 15 minutes until homogenous mixture is obtained.

Contact your AkzoNobel representative if you are attempting to reduce the gloss more than 15 degrees.

PDF Name: CA-PIS_870-1700_Selva_Pro_Flattening_Paste
Tack Free Time: N/A
Files: CA-PIS_870-1700_Selva_Pro_Flattening_Paste.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
Dry to Sand: N/A
VOC less exempt g/l: 717
VOC g/l: 717
Dry to Stack: N/A
Note: N/A
Note:

N/A

spec_description:

Flattening Paste 870-1700 is a powder dispersion used for gloss adjustment

spec_uses:

Gloss Adjustments

Suggested Uses: Gloss Adjustments
Mixing Ratio:

N/A

Pot Life: N/A
Application Viscosity:

N/A


Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:

N/A


Note application:

N/A


Viscosity:

N/A

Flash Point: 55° F (13° C)
Density (lb/gal): 0.96
Solid (% by weight): 26.0
Solid (% by volume): 17.0
Shelf Life (months): 24

Selva™ Pro

870-1700 Selva™ Pro Flattening Paste

Find distributor Trouver un distributeur

spec_description:

Flattening Paste 870-1700 is a powder dispersion used for gloss adjustment

Read more

Selva™ Pro

870-1700 Selva™ Pro Flattening Paste

spec_description:

Flattening Paste 870-1700 is a powder dispersion used for gloss adjustment

Read more
Product codeCodes de produit
Product Codes:

870-1700


Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: 55° F (13° C)
Density (lb/gal): 0.96
Solid (% by weight): 26.0
Solid (% by volume): 17.0
Shelf Life (months): 24

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us