Chemlife

873-1251 Chemlife® 24 Catalyst

Product Codes:

873-1251 Catalyst

Surface Preparation:

N/A

General Information:

Measure carefully and accurately before adding to products. Agitate when adding to recommended acid cured products.

Refer to Technical Bulletin of the Chemlife 24. Do not under-catalyze or over-catalyze with this product. Under catalyzation will result in slow curing or an inability of the coating to cure.Over-catalyzation will result in a brittle film.

Avoid contamination or contact ferrous metals. Use high-grade stainless steel or appropriate plastic equipment and parts.

This product is corrosive. Protect eyes and skin from contact or splash. In case of accident, wash immediately with plenty of water for 20 minutes and call a doctor.

PDF Name: CA-PIS_873-1251_Chemlife_24_Catalyst

Tack Free Time: N/A

Files: CA-PIS_873-1251_Chemlife_24_Catalyst.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

test: N/A

VOC less exempt g/l: 740

VOC g/l: 740

Dry to Stack: N/A

Note: N/A

Note:

See individual compliance sheets for specific data.

spec_description:

Designed as a fast catalyst for Chemlife 24 systems.

spec_uses:

This product cannot be used alone. Refer to the Chemlife 24 technical bulletin.

For interior use only.

Suggested Uses: N/A

Mixing Ratio:

As recommended on Product Information Sheets

Pot Life: N/A

Application Viscosity:

N/A

Reducer: N/A

Retarder: N/A

Clean-up Solvent: Lacquer Thinner

Recommended Wet Film: N/A

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: -4°C (39°F)

Density (lb/gal): 0.87 ± 2% at 25°C

Solid (% by weight): 15%

Solid (% by volume): 9%

Shelf Life (months): 6

Chemlife

873-1251 Chemlife® 24 Catalyst

Find distributor Trouver un distributeur

spec_description:

Designed as a fast catalyst for Chemlife 24 systems.

BACK

Chemlife

873-1251 Chemlife® 24 Catalyst

spec_description:

Designed as a fast catalyst for Chemlife 24 systems.

Product codeCodes de produit
Product Codes:

873-1251 Catalyst

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: -4°C (39°F)

Density (lb/gal): 0.87 ± 2% at 25°C

Solid (% by weight): 15%

Solid (% by volume): 9%

Shelf Life (months): 6

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: CA-PIS_873-1251_Chemlife_24_Catalyst.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap