Isolante Hardener
876-9084 Isolante Hardener
Product Codes:

876-9084

Surface Preparation:

N/A

General Information:

The mixed product contains 876-9084, an isocyanate based co-reactant. Please follow all precautions associated with handling and use of those materials. Refer to MSDS for detail information.

The relative humidity in the application and drying room should not exceed 75% for maximum coatingperformance.

PDF Name: CA-PIS_876-9084_Isolante_Hardener
Tack Free Time: N/A
Files: CA-PIS_876-9084_Isolante_Hardener.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
Dry to Sand: N/A
VOC less exempt g/l: 750
VOC g/l: 750
Dry to Stack: N/A
Note: N/A
Note:

N/A

spec_description:

Polyisocyanate co-polymer solution, it is used as a hardener for two-component polyurethanes.

spec_uses:

Hardener used in the polyurethane Selva Pro Isolante Sealer 420-1205.

Suggested Uses: Hardener for Isolante Sealer 420-1205
Mixing Ratio:

N/A

Pot Life: N/A
Application Viscosity:

N/A

Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:

N/A

Note application:

N/A

Viscosity:

Zahn #2 signature cup 10-14 sec at 25° C

Flash Point: -4° C
Density (lb/gal): 0.84
Solid (% by weight): 20.4
Solid (% by volume): 15.8
Shelf Life (months): 12

Isolante Hardener

876-9084 Isolante Hardener

Find distributor Trouver un distributeur

spec_description:

Polyisocyanate co-polymer solution, it is used as a hardener for two-component polyurethanes.

Read more

Isolante Hardener

876-9084 Isolante Hardener

spec_description:

Polyisocyanate co-polymer solution, it is used as a hardener for two-component polyurethanes.

Read more
Product codeCodes de produit
Product Codes:

876-9084


Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 10-14 sec at 25° C

Flash Point: -4° C
Density (lb/gal): 0.84
Solid (% by weight): 20.4
Solid (% by volume): 15.8
Shelf Life (months): 12

Download product information sheets

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Image

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Need help? Contact our team of wood coating experts.

Contact us