Catalyst

999-017 Catalyst

Product Codes:

999-017 Catalyst

Surface Preparation:

Refer to the appropriate coating’s Product Information for mixing ratio’s and application instructions.

General Information:

Because it is a weak acid, 999-017 should not have prolonged contact with ferrous metals, all containers and mixing devices should be plastic lined or high-grade stainless steel. Acid catalyst should be stored in a cool dry place away from direct sunlight. If the catalyst comes in contact with skin, clean with soap and water immediately. If it comes in contact with the eyes, flush immediately with water for at least 15 minutes and call a doctor. The area must be mechanically ventilated when this product is used in large quantities.

PDF Name: CA-PIS_999-017_Catalyst

Tack Free Time: N/A*

Files: CA-PIS_999-017_Catalyst.pdf

Dry to Sand : N/A

Dry to Stack: N/A

Tack Free Time: N/A

Dry to Sand: N/A

VOC less exempt g/l: 732

VOC g/l: 732

Dry to Stack: N/A

Note: N/A

Note:

N/A

spec_description:

This is a PTSA based acid catalyst that is designed for use in many of Chemcraft’s acid catalyzed coatings.

spec_uses:

999-017 is designed as a fast catalyst for Reactive Amino Coatings.

Suggested Uses:

Acid Catalyst

Mixing Ratio:

Refer to appropriate Product Info Sheet

Pot Life:

Refer to appropriate Product Info Sheet

Application Viscosity:

Refer to appropriate Product Info Sheet

Reducer: N/A

Retarder: N/A

Clean-up Solvent: Lacquer Thinner

Recommended Wet Film: Refer to appropriate

Coverage:

N/A

Note application:

N/A

Viscosity:

N/A

Flash Point: -3°C (26°F)

Density (lb/gal): 0.89

Solid (% by weight): 17%

Solid (% by volume): 11%

Shelf Life (months): 12

Catalyst

999-017 Catalyst

Find distributor Trouver un distributeur

spec_description:

This is a PTSA based acid catalyst that is designed for use in many of Chemcraft’s acid catalyzed coatings.

BACK

Catalyst

999-017 Catalyst

spec_description:

This is a PTSA based acid catalyst that is designed for use in many of Chemcraft’s acid catalyzed coatings.

Product codeCodes de produit
Product Codes:

999-017 Catalyst

Product information

Product specificationsSpécifications du produit

Viscosity:

N/A

Flash Point: -3°C (26°F)

Density (lb/gal): 0.89

Solid (% by weight): 17%

Solid (% by volume): 11%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: CA-PIS_999-017_Catalyst.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap