550-1602 Aquaprime® II Neutral WB Pigmented Primer

This product is designed for hardwoods or MDF. It is formulated especially for window and door frames, joinery pieces, and cabinets.

Substrate must be sanded using 120, 150 or 180 grit paper prior to coating. Aquaprime II Neutral should be sanded with 280/320 grit paper prior to being coated. Aquaprime II Neutral should be coated within (8) hours of being sanded for maximum adhesion. When recoating, the previous coat of Aquaprime II Neutral must be sanded and the next coat applied within (8) hours.

Mix material before use. Add water to reduce if required and mix thoroughly. Aquaprime is used under 228-46XX/228-95XX. Apply by spray at 4 - 5 mils wet. Application and drying conditions must be at temperatures of 18C or higher and at a humidity of less than 65%. Increased air flow or drying temperatures, including infrared, will greatly decrease dry times. Aquaprime II Neutral must be agitated thoroughly at all times to ensure product consistency. Contact with metal surfaces should be avoided. Keep from freezing.  Maximum film build of total coating system must not exceed 4 mils dry. The completed coating system should be checked for required properties prior to start-up of production.