Chemvar

421-67XX Chemvar Conversion Varnish Clear Topcoat

Product Codes:

421-6710 10º Matte

421-6720 20º Low Gloss

421-6735 35º Satin

421-6750 50º Semi-Gloss

421-6790 90º High Gloss

Surface Preparation:

Before application of Chemvar, the first coat must be sanded using #280/320 grid stearated paper and free of dust and all contaminants. The topcoat must be applied within a maximum of 8 hours after sanding of the last coat applied. Chemvar must not be applied over metal, old oil finish or nitrocellulose lacquers. Stain systems used under Chemvar should be acid stable.

General Information:

Catalyze and reduce material as recommended. Apply 3 to 5 wet mils on sanded surface. One extra coat can be applied following a complete cure and a sanding with a #280/320 paper. Maximum film build of the top coat should not exceed 3 mils dry. Maximum film build of the system should not exceed 4 mils dry. Chemvar must not be polluted with oil, varnish or the like and must not be sanded with steel wool between coats. Avoid all contact with metallic surfaces

To obtain complete cure, Chemvar must be applied at a temperature above 18ºC and relative humidity below 65%. When drying, this product should not be exposed to ammonia vapors. Finished surface must not be cleaned with ammonia containing products. Always use containers and equipment made of plastic or stainless steel to avoid discoloration of the material due to oxidation.

Sealers to use with 421-67XX: 390-001, 390-0060, 401-004 catalyzed, 401-028 catalyzed, 431-1219, 432-1220, 546-8003 and 546-5192.

PDF Name: CA-PIS_421-67XX_Chemvar_Conversion_Varnish_Clear_Topcoat

Tack Free Time: 30 - 45 minutes

Files: CA-PIS_421-67XX_Chemvar_Conversion_Varnish_Clear_Topcoat.pdf

Dry to Sand : 90 - 120 minutes

Dry to Stack: 12 hours

Tack Free Time: Flash off before entering oven

Dry to Sand: 45 - 60 minutes

VOC less exempt g/l: 463

VOC g/l: 463

Dry to Stack: 2 - 3 hours

Note: N/A

Note:

N/A

spec_description:

Chemvar is a high quality, acid curing Reactive Amino Coating (RAC). This is a fast building product due to its high content (45% volume). Chemvar has very good light stability based on the choice of resin used in the product and the addition of a UV block additive. This conversion varnish gives a smooth, knock proof and hardwearing surface resisting influence from alcohol, water, etc.

Special recognition: when applied as specified, will meet required performance for the ANSI/KCMA A161.1 1990 9.0 Finish Test.

spec_uses:

Chemvar is recommended for kitchen cabinets, high build office or residential furniture as well as other interior wood applications.

Suggested Uses:

Spray

Mixing Ratio:

8% 873-2400

Pot Life: 8 hours

Application Viscosity:

22-30 sec Zahn #2 at 25°C

Reducer: 5-15% 121-803 or 121-8020

Retarder: 800-5328 EEP

Clean-up Solvent: Lacquer Thinner

Recommended Wet Film: 3-5 wet mils

Coverage:

18 m²/l (190 pi²/l) at 1 mil dry and at 100% efficiency. Coverage will vary depending on method of application or coating thickness.

Note application:

N/A

Viscosity:

Zahn #2 signature cup 34-35 sec at 25ºC (90º)

Zahn #2 signature cup 38-39 sec at 25ºC (10 to 50º)

Flash Point: 12°C (55°F)

Density (lb/gal): 1.00 ± 2% at 25°C

Solid (% by weight): 54%

Solid (% by volume): 45%

Shelf Life (months): 12

Chemvar

421-67XX Chemvar Conversion Varnish Clear Topcoat

Find distributor Trouver un distributeur

spec_description:

Special recognition: when applied as specified, will meet required performance for the ANSI/KCMA A161.1 1990 9.0 Finish Test.

BACK

Chemvar

421-67XX Chemvar Conversion Varnish Clear Topcoat

spec_description:

Special recognition: when applied as specified, will meet required performance for the ANSI/KCMA A161.1 1990 9.0 Finish Test.

Product codeCodes de produit
Product Codes:

421-6710 10º Matte

421-6720 20º Low Gloss

421-6735 35º Satin

421-6750 50º Semi-Gloss

421-6790 90º High Gloss

Product information

Product specificationsSpécifications du produit

Viscosity:

Zahn #2 signature cup 34-35 sec at 25ºC (90º)

Zahn #2 signature cup 38-39 sec at 25ºC (10 to 50º)

Flash Point: 12°C (55°F)

Density (lb/gal): 1.00 ± 2% at 25°C

Solid (% by weight): 54%

Solid (% by volume): 45%

Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environmentales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: CA-PIS_421-67XX_Chemvar_Conversion_Varnish_Clear_Topcoat.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommended for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro Conversion Varnish Primer Surfacer est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more

About our brand	Products	Distributors	Using our products
Contact us	Pre-Catalyzed	Our Distributors	How-to-videos
	Post-Catalyzed	Our Ordering portals	Troubleshooting Guides
	Polyurethane		Glossary of Terms
	Waterborne		Associations
	Color Systems		Mobile Product App
	Vinyl Products
	Nitrocellulose
	Specialty Products

Cookies	Cookie settings	Privacy	Sitemap