N Butyl Acetate
800-5301 N Butyl Acetate (100-122) (014-1900)
Product Codes:
800-5301 N Butyl Acetate
Surface Preparation:
N/A
General Information:
N/A
PDF Name: CA-PIS_800-5301_N_Butyl_Acetate_(100-122)_(014-1900)
Tack Free Time: N/A
Files: CA-PIS_800-5301_N_Butyl_Acetate_100-122_014-1900.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
Dry to Sand: N/A
VOC less exempt g/l: 880
VOC g/l: 880
Dry to Stack: N/A
Note: N/A
Note:
See individual compliance sheets for specific data.
spec_description:
Ester type solvent with a medium evaporation rate.
spec_uses:
It is a thinner and reducer for general use in lacquer and varnish. Especially suitable for polyurethane coatings.
Suggested Uses: N/A
Mixing Ratio:
See Technical bulletin of the product to be reduced
Pot Life: N/A
Application Viscosity:
N/A
Reducer: N/A
Retarder: N/A
Clean-up Solvent: N/A
Recommended Wet Film: N/A
Coverage:
N/A
Note application:
N/A
Viscosity:
N/A
Flash Point: 27°C
Density (lb/gal): 0.88 ± 2% at 25°C
Solid (% by weight): 0%
Solid (% by volume): 0%
Shelf Life (months): Unlimited

N Butyl Acetate

800-5301 N Butyl Acetate (100-122) (014-1900)

Find distributor Trouver un distributeur

spec_description:

Ester type solvent with a medium evaporation rate.

BACKRetour

Product codeCodes de produit
Product Codes:

800-5301 N Butyl Acetate

Product information

Product specificationsSpécifications du produit

Viscosity:
N/A
Flash Point: 27°C
Density (lb/gal): 0.88 ± 2% at 25°C
Solid (% by weight): 0%
Solid (% by volume): 0%
Shelf Life (months): Unlimited

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: CA-PIS_800-5301_N_Butyl_Acetate_100-122_014-1900.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more