Catalyst
999-017 Catalyst
Product Codes:
999-017 Catalyst
Surface Preparation:
Refer to the appropriate coating’s Product Information for mixing ratio’s and application instructions.
General Information:
Because it is a weak acid, 999-017 should not have prolonged contact with ferrous metals, all containers and mixing devices should be plastic lined or high-grade stainless steel. Acid catalyst should be stored in a cool dry place away from direct sunlight. If the catalyst comes in contact with skin, clean with soap and water immediately. If it comes in contact with the eyes, flush immediately with water for at least 15 minutes and call a doctor. The area must be mechanically ventilated when this product is used in large quantities.
PDF Name: CA-PIS_999-017_Catalyst
Tack Free Time: N/A*
Files: CA-PIS_999-017_Catalyst.pdf
Dry to Sand : N/A
Dry to Stack: N/A
Tack Free Time: N/A
Dry to Sand: N/A
VOC less exempt g/l: 732
VOC g/l: 732
Dry to Stack: N/A
Note: N/A
Note:
N/A
spec_description:
This is a PTSA based acid catalyst that is designed for use in many of Chemcraft’s acid catalyzed coatings.
spec_uses:
999-017 is designed as a fast catalyst for Reactive Amino Coatings.
Suggested Uses:
Acid Catalyst
Mixing Ratio:
Refer to appropriate Product Info Sheet
Pot Life:
Refer to appropriate Product Info Sheet
Application Viscosity:
Refer to appropriate Product Info Sheet
Reducer: N/A
Retarder: N/A
Clean-up Solvent: Lacquer Thinner
Recommended Wet Film: Refer to appropriate
Coverage:
N/A
Note application:
N/A
Viscosity:
N/A
Flash Point: -3°C (26°F)
Density (lb/gal): 0.89
Solid (% by weight): 17%
Solid (% by volume): 11%
Shelf Life (months): 12

Catalyst

999-017 Catalyst

Find distributor Trouver un distributeur

spec_description:

This is a PTSA based acid catalyst that is designed for use in many of Chemcraft’s acid catalyzed coatings.

BACKRetour

Product codeCodes de produit
Product Codes:

999-017 Catalyst

Product information

Product specificationsSpécifications du produit

Viscosity:
N/A
Flash Point: -3°C (26°F)
Density (lb/gal): 0.89
Solid (% by weight): 17%
Solid (% by volume): 11%
Shelf Life (months): 12

UsesUtilisations

Environmental data (as supplied)Données environnementales (tel que fourni)

Application dataDonnées d'application

Surface PreparationPréparation de la surface

General InformationInformations générales

Drying TimesTemps de séchage

Find distributor Trouver un distributeur

Download product information sheets

Files: CA-PIS_999-017_Catalyst.pdf

These products are designed for industrial use only. AkzoNobel views safety as a top priority. Please refer to Material Safety Data Sheet for information on the safe use of this product.

Dry times are greatly affected by film build, porosity of substrate, air movement as well as heat and humidity. Temperatures are based on actual board temperature. This may vary depending on length of time for boards to reach these temperatures. Minimum curing temperatures of 64°F/18°C must be maintained throughout the curing cycle to achieve the film integrity as stated in product features.

Recommanded for interior woodwork

OmniBuild Pro Conversion Varnish Primer Surfacer is recommended for interior woodwork on solid wood and MDF.

Recommandé pour les boiseries intérieures

OmniBuild Pro, apprêt à catalyser est recommandé pour les travaux de menuiserie intérieure sur bois massif et MDF.

View our ranges

Our extensive wood coatings expertise covers all technologies. From pre-catalyzed to waterborne, nitrocellulose to polyurethane, we deliver a wide range of top-performing products for your business.

Learn more